Construction Journals

Cement Publications

In the dynamic world of construction and engineering, cement plays a pivotal role. The ASTM Digital Library offers an extensive collection of technical publications and standards that not only delve into the rich history and evolution of cement but also provide invaluable insights into its current and future applications. With a focus on quality, safety, and performance, these resources are essential for organizations striving to adhere to industry benchmarks.

The library shines a spotlight on innovative research and sustainable practices, equipping professionals with the knowledge to stay at the forefront of cement technology. By integrating these standards into your projects, you can enhance construction quality and ensure long-lasting durability.

The ASTM Digital Library is your gateway to the expertise of leading professionals and a treasure trove of information on emerging trends, positioning your business as a knowledgeable and forward-thinking leader in the industry

petridish

Cement Publications

ASTM Special Technical Publications

  • STP1613 Advances in Cement Analysis and Concrete Petrography
  • STP1612 Masonry 2018
  • STP 1566 Geopolymer Binder Systems
  • STP 1512 Masonry
  • STP 1512 Masonry
  • STP 1512 Masonry
  • STP 1494 Natural Cement
  • STP 1246 Masonry: Esthetics, Engineering, and Economy
  • STP 1215 Petrography of Cementitious Materials
  • STP 1180 Masonry: Design and Construction, Problems and Repair
  • STP 1064 Carbonate Additions to Cement
  • STP 985 Rapid Methods for Chemical Analysis of Hydraulic Cement
  • STP 961 Uniformity of Cement Strength
  • STP 930 Alkalies in Concrete
  • STP 897 Blended Cements
  • STP 663 Cement Standards: Evolution and Trends
  • STP 473 Finemess of Cement
  • STP 441 Cement, Comparison of Standards and Significance of Particular Tests
  • STP 395 Analytical Techniques for Hydraulic Cements and Concrete
  • STP 266 Symposium on Effect of Water-Reducing Admixtures and Set-Retarding Admixtures on Properties of Concrete
  • STP 127 Changes in Characteristics of Portland Cement as Exhibited by Laboratory Tests Over the Period 1904 to 1950

Journal of ASTM International

  • Effects of Supplementary Cementitious Materials on Apparent Activation Energy
  • Statistical Calibration of ASTM C150 Bogue-Derived Phase Limits to Directly Determined Phases by Quantitative X-Ray Powder Diffraction
  • Effects of Analytical Precision on Bogue Calculations of Potential Portland Cement Composition
  • Performance of Olive Waste Ash Concrete Exposed to Thermal Cycling
  • Prediction of Potential Compressive Strength of Portland Clinker from Production Conditions in Cement Kiln
  • Determining the Air-Entraining Admixture Dosage Response for Concrete with a Single Concrete Mixture
  • Use of Isothermal Conduction Calorimetric Method for Measuring the Heat of Hydration of Cement
  • Concrete Hygrothermal Properties and the Influence of their Variability on Moisture Movement in Concrete Walls
  • Assessing the Durability of Engineered Cementitious Composites Under Freezing and Thawing Cycles
  • Predicting Seven-Day Heat of Hydration of Hydraulic Cement from Standard Test Properties
  • Performance of Fibrous Concrete under Sulfate Cyclic Treatment
  • Relationships Between Key ASTM Test Methods Determined on Concrete and Concrete-Equivalent-Mortar Mixtures
  • The Role of XRF, Inter-Element Corrections, and Sample Preparation Effects in the 100-Year Evolution of ASTM Standard Test Method C114
  • XRF, XRD, and Thermal Analysis Techniques for Quantitative Determination of Portland Cement and Slag Cement Constituents
  • Development of a Plane Isothermal Calorimeter: Relating Apparent Activation Energy of Concrete and the Corresponding Mortar
  • Roman Cement Mortars in Europe’s Architectural Heritage of the 19th Century
  • Perspectives: The Reintroduction of Natural Cement
  • Methodology for Rapid Determination of Pozzolanic Activity of Materials
  • An Overview of the History and Economic Geology of the Natural Cement Industry at Rosendale, Ulster County, New York
  • Masonry Repairs at Cheshire Mill No. 1, Harrisville, New Hampshire
  • Grouting Performance of Microfine Cement and Silica Fume Mix into Sands
  • Effect of Chemical Admixtures on Rheology of Cement Paste at High Temperature
  • The Natural Cement Revival
  • Hydration Processes in Pastes of Roman and American Natural Cements
  • Formulating with Rosendale Natural Cement
  • Calcination of Marls to Produce Roman Cement
  • Natural Cement in the 21st Century
  • Utilization of Discarded Fly Ash as a Raw Material in the Production of Portland Cement
  • Comparison of the Life Cycle Assessments of an Insulating Concrete Form House and a Wood Frame House
  • Used Oil Derived Fuel Utilization for the Production of Portland Cement
  • From Development to Implementation of Sustainable Concrete in a Precast Plant — A Case Study
  • Using Dynamic Rheology to Measure Cement-Admixture Interactions
  • Effect of Continuous Agitation on Concrete Rheology

Geotechnical Testing Journal

  • Development of Strength Models for Prediction of Unconfined Compressive Strength of Cement/Byproduct Material Improved Soils
  • Microstructural and Mineralogical Evaluation of the Effectiveness of Mixing Treatments in Stabilized Clays

Journal of Advances in Civil Engineering Materials (ACEM)

  • Influence of Silica Fume Additive and Temperature History on the Volume Change of Ultra-High-Strength Cement Paste and Concrete
  • Sustainable, Hydraulic-Lime-Limestone Binders for Construction
  • Nanocalcined Clay and Nanolime as Stabilizing Agents for Expansive Clayey Soil: Some Geotechnical Properties
  • Retraction
  • Relating Compressive Strength to Heat Release in Mortars
  • Effect of Calculation Methods on Cement Paste and Mortar Apparent Activation Energy
  • Effect of Fly Ash on Optimum Sulfate Levels Measured Using Heat and Strength at Early Ages
  • Development of a Reference Material for the Calibration of Cement Paste Rheometers
  • Workability and Setting Time of Alkali Activated Blast Furnace Slag Paste
  • Mechanical Property Performance of Polymer-Modified Calcium Sulfoaluminate Cement Mortar Systems
  • Material Characterization Studies on Low- and High-Carbon Rice Husk Ash and Their Performance in Portland Cement Mixtures

Journal of Advances in Civil Engineering Materials (ACEM)

  • The Use of Numerical Extrapolation to Accelerate Delayed Ettringite Formation Tests
  • Effect of Supplementary Cementitious Materials on Rheology of Oil Well Cement Slurries
  • Quantitative X-Ray Powder Diffraction Analysis of Portland Cements: Proficiency Testing for Laboratory Assessment
  • Monitoring Setting of Geopolymers
  • The Role of Concrete Industry Standards as Institutional Barriers to More Sustainable Concrete Bridge Infrastructure
  • Sorptivity Ratio and Compressive Strength of Alkali-Activated Blast Furnace Slag Paste
  • Comparative Analysis of the Influence of Sodium and Potassium Silicate Solutions on the Kinetics and Products of Slag Activation
  • Performance Criteria for Chemical Analysis of Hydraulic Cements by X-Ray Fluorescence Analysis
  • Impact of Viscosity on Hydration Kinetics and Setting Properties of Cementitious Materials
  • Model and Test Methods for Stability of Fresh Cement Paste
  • Development of Self-compacting Concrete with Good Shape Stability for Slipform Construction
  • Rheological Evaluation of Slump Flow Curves of Self-Consolidating Concrete From Instrumented Spread Table
  • An Empirical Approach to Design Optimized Self-Compacting Concrete Mixes
  • Measuring Cement Paste Rheology Using a Modified Dynamic Shear Rheometer: An Approach to Detect Cement-Admixtures Incompatibilities

Journal of Testing and Evaluation

  • Behavior of Fiber and Nonfiber Reactive Powder Concrete in an Aggressive Environment
  • Fatigue Fracture Investigation of Engineered Cementitious Composites
  • Influence of Loading Pressure and Sample Preparation on Ionic Concentration and Resistivity of Pore Solution Expressed from Concrete Samples
  • A New Fusion-Based Agricultural Synthetic Aperture Radar Image Despeckling by Using Anisotropic Diffusion and Discrete Wavelet Transform Methods
  • The Effects of Combined Retarders on the Properties of Desulfurized Gypsum
  • Effects of Thermal Conductivity of Soil on Temperature Development and Cracking in Mass Concrete Footings
  • Experimental Investigation of Chemical and Physical Properties of Cements Manufactured in Pakistan
  • An Automated Monitoring System to Measure Shrinkage of Cement-Based Materials in Multiple Environments
  • Measurement and Prediction of Heat of Hydration of Portland Cement Using Isothermal Conduction Calorimetry
  • In Situ Observation and Model Test on Zonal Disintegration in Deep Tunnels
  • Evaluation of Effect of Superplasticizer on Performance of Self-Compacting Concrete
  • Portland Cement Hydration by Electrical Resistivity Method and Computer Simulation
  • Application Research on Anti-Cracking Agent for Semi-Rigid Base
  • Examining Polymerization of Kaolinitic Concrete Using Scanning Electron Microscopy and Raman Spectroscopy
  • Time-Dependent Rheological Changes of Fly Ash Blended Cement Paste
  • Chloride Binding Capacity of Cement Paste Containing Layered Double Hydroxide (LDH)
  • Comparison of Tensile Properties of Strain Hardening Cementitious Composite Cured in Normal and Accelerated Conditions
  • The Application and Early-Age Behaviors of Continuously Reinforced Bonded Concrete Overlay of Distressed Jointed Concrete Pavements
  • The Application of Various Indicators for the Estimation of Carbonation and pH of Cement Based Materials
  • On the Evaluation of Setting Time of Cement Paste Based on ASTM C403 Penetration Resistance Test
  • Effect of Sampling Location on the Air Void Analyzer Test Results on Concrete Pavements: Evaluation of Data from a 16 State-Pooled Fund Project
  • A Laboratory Study of the Effectiveness of Various Additives on Moisture Susceptibility of Asphalt Mixtures
  • California Bearing Ratio Behavior of Soil-Stabilized Class F Fly Ash Systems
  • A Low-Cost, Computer-Controlled Adiabatic Calorimeter for Determining the Heat of Hydration of Concrete
  • Elastic Strain, Creep, and Recovery in Mortars: Additional Analysis
  • Monitoring of Cement Stabilized Surrogate Waste Using Resonant Frequency Techniques
  • Prediction of the Strength of Ceramic Tubular Components: Part I—Analysis
  • Prediction of the Strength of Ceramic Tubular Components: Part II—Experimental Verification
  • Effect of Bearing Plate Properties on the Behavior of Block Masonry Prisms under Axial Compression
  • Gypsum Content of Cements Used in Concrete Cured by Accelerated Methods
  • Correlation of Strength of Cement Mortar Cured by 28-Day Standard and Accelerated Methods
  • Past, Present, and Potential Developments of Sulfate-Resisting Concretes
  • Discussion of “A New Test for Sulfate Resistance of Cements” by P. K. Mehta and O. E. Gjørv
  • The Effects of Temperature and Relative Humidity on Static Strength of Hydrated Portland Cement
  • Influence of Calcium Chloride on the Drying Shrinkage of Alite Paste
  • Base Stabilization Using Pelletized Blast Furnace Slag
  • A Simple Technique for Determining Relative Strength of Aggregates
  • Polymeric Materials for Concrete
  • Mechanisms of Acceleration by Calcium Chloride: A Review
  • Tricalcium Silicate Hydration in the Presence of Various Salts
  • A New Test for Sulfate Resistance of Cements
  • A Study of Cement and Concrete Correlation
  • Precision of Early Shrinkage Measurements
  • Some Factors Affecting Cement Mortar Strength Results Using ASTM Standard Test Methods C 348 and C 349
  • Capillary Porosity in Hardened Cement Paste
discussion

Concrete Publications

Concrete, the backbone of modern infrastructure, is a material celebrated for its strength and versatility. The ASTM Digital Library’s comprehensive resources on concrete cover everything from its fundamental properties to the latest in eco-friendly alternatives and high-performance mixes.

These ASTM standards are more than just guidelines; they are the blueprints for ensuring the highest quality and safety in your projects. By accessing our extensive library, you gain insights into real-world applications and cutting-edge developments, allowing your organization to not only meet but exceed industry expectations.

The contributions from renowned engineers and researchers in our library serve as a beacon, guiding your business towards innovative solutions and keeping you ahead in a competitive market. Embrace the future of concrete technology with the ASTM Digital Library, and cement your position as an industry leader.

Concrete Publications on Digital Library

MNL49PCOMBO User’s Guide to ASTM Specification C94/C94M on Ready-Mixed Concrete: 2nd Edition + ASTM Standards for Ready-Mixed Concrete: 5th Edition
MNL49-2ND User’s Guide to ASTM Specification C94/C94M on Ready-Mixed Concrete: 2nd Edition

ASTM Special Technical Publications

  • STP 1613 Advances in Cement Analysis and Concrete Petrography
  • STP 1611 Stress Wave Theory and Testing Methods for Deep Foundations: 10th International Conference
  • STP 1551 Pervious Concrete
  • STP1511 Recent Advancement in Concrete Freezing-Thawing (F-T) Durability
  • STP 1276 Techniques to Assess the Corrosion Activity of Steel Reinforced Concrete Structures
  • STP 1176 Polymer-Modified Hydraulic-Cement Mixtures
  • STP 1065 Corrosion Rates of Steel in Concrete
  • STP 1061 Petrography Applied to Concrete and Concrete Aggregates
  • STP 858 Temperature Effects on Concrete
  • STP 597 Living with Marginal Aggregates
  • STP 205 Cements and Concrete
  • STP 169D Significance of Tests and Properties of Concrete and Concrete-Making Materials
  • Quantitative X-Ray Powder Diffraction Analysis of Portland Cements: Proficiency Testing for Laboratory Assessment
  • Monitoring Setting of Geopolymers
  • The Role of Concrete Industry Standards as Institutional Barriers to More Sustainable Concrete Bridge Infrastructure
  • Sorptivity Ratio and Compressive Strength of Alkali-Activated Blast Furnace Slag Paste
  • Comparative Analysis of the Influence of Sodium and Potassium Silicate Solutions on the Kinetics and Products of Slag Activation
  • Performance Criteria for Chemical Analysis of Hydraulic Cements by X-Ray Fluorescence Analysis
  • Impact of Viscosity on Hydration Kinetics and Setting Properties of Cementitious Materials
  • Model and Test Methods for Stability of Fresh Cement Paste
  • Development of Self-compacting Concrete with Good Shape Stability for Slipform Construction
  • Rheological Evaluation of Slump Flow Curves of Self-Consolidating Concrete From Instrumented Spread Table
  • An Empirical Approach to Design Optimized Self-Compacting Concrete Mixes
  • Measuring Cement Paste Rheology Using a Modified Dynamic Shear Rheometer: An Approach to Detect Cement-Admixtures Incompatibilities

Journal of ASTM International

  • Comparison of Attenuation Coefficients for VVER-440 and VVER-1000 Pressure Vessels
  • Comparison of ASTM C311 Strength Activity Index Testing versus Testing Based on Constant Volumetric Proportions
  • Application of Frequency Selective Circuits for Crack Detection in Concrete Elements
  • Effect of Deflection Increment Size on Apparent Performance of Fiber Reinforced Concrete Beams and Panels
  • A Dual Concentric Ring Test for Evaluating Residual Stress Development due to Restrained Volume Change
  • Shrinkage Cracking Behavior of Fiber Reinforced Concrete: As Assessed Using the Restrained Ring Test
  • Evaluation of the Critical Air-Void System Parameters for Freeze-Thaw Resistant Ternary Concrete Using the Manual Point-Count and the Flatbed Scanner Methods
  • Optimization of Production Conditions in Cement Mill to Achieve Optimal Cement Properties at Early Ages
  • Comparison of Workability Test Methods for Self-Consolidating Concrete
  • Evaluation of Two Automated Methods for Air-Void Analysis of Hardened Concrete
  • Assessing Molding Procedure of Compressive Strength Test Specimens for Self-Consolidating Concrete
  • Predicting Dynamic Segregation of Self-Consolidating Concrete from the Slump-Flow Test
  • Determination of Rheology of Self-Consolidating Concrete Using the 4C-Rheometer and How to Make Use of the Results
  • Experimental Study on Freeze-Thaw Damage Mechanism of Lightweight Aggregate Concrete
  • Assessment of Air Entrainment in Fresh Cement Paste Using Ultrasonic Nondestructive Testing
  • Freeze-Thaw Performance of Concrete: Reconciling Laboratory-Based Specifications with Field Experience
  • Effects of Strength, Permeability, and Air Void Parameters on Freezing-Thawing Resistance of Concrete with and Without Air Entrainment
  • Using X-Ray Absorption to Assess Moisture Movement in Cement-Based Materials
  • Influence of Test Machine Control Method on Flexural Performance of Fiber Reinforced Concrete Beams
  • The Practical Application of a Flatbed Scanner for Air-Void Characterization of Hardened Concrete
  • Test Methods for Characterizing Air Void Systems in Portland Cement Pervious Concrete
  • Changes in Fluid Penetrability and Mechanical Properties of Concrete due to High Temperature Exposure
  • Effect of Autoclave Curing on the Compressive Strength and Elastic Modulus of Lightweight Aggregate Concrete
  • Mechanical Properties of High Strength Concrete with Field-Demolished Concrete as Aggregates
  • Use of Ground Clay Brick as a Pozzolanic Material in Concrete
  • The Effect of Radial Crack Locations on Load Resistance in C1550 Panel Tests
  • Comments on the Interpretation of Results from the Restrained Ring Test
  • Use of the Accelerated Mortar Bar Test to Evaluate the Effectiveness of LiNO3 Against Alkali-Silica Reaction—Part 1: Pore Solution Chemistry and Influence of Various Parameters
  • Use of the Accelerated Mortar Bar Test to Evaluate the Effectiveness of LiNO3 Against Alkali-Silica Reaction—Part 2: Comparison with Results from the Concrete Prism Test
  • Catching the Elusive Water-Cement Ratio Using Petrographic Methods—and Their Evaluation
  • Determination of the Water Diffusivity of Concrete Using Drying/Absorption Test Results
  • The Use of the Foam Index Test to Predict AEA Dosage in Concrete Containing Fly Ash: Part I—Evaluation of the State of Practice
  • The Use of the Foam Index Test to Predict Air-Entraining Admixture Dosage in Concrete Containing Fly Ash: Part II—Development of a Standard Test Method: Apparatus and Procedure
  • The Use of the Foam Index Test to Predict Air-Entraining Admixture Dosage in Concrete Containing Fly Ash: Part III—Development of a Standard Test Method: Proportions of Materials
  • Effects of Temperature, Chemical, and Mineral Admixtures on the Electrical Conductivity of Concrete
  • A Rapid Method for Determination of the Chloride Migration Coefficient in Concrete Using Electrical Field
  • Pervious Concrete Mixture Proportions for Improved Freeze-Thaw Durability
  • A Novel Approach to Characterize Entrained Air Content in Pervious Concrete
  • Proposed Method for Determining the Residual Mortar Content of Recycled Concrete Aggregates
  • Design of a New Rheometer for Concrete
  • Some Investigations for Establishing Suitability of Watson’s Strength-Porosity Model for Concrete
  • Effect of Material Parameters on Color of Cementitious Pastes
  • Effectively Estimating In situ Porosity of Pervious Concrete from Cores
  • Strength Correlation of High Performance Concrete Using Different Sized Specimens
  • A Comparison of Flexural Performance for Third-Point Loaded and Centrally-Loaded Fiber-Reinforced Concrete Beams
  • Statistical Distribution of Fiber-Reinforced Concrete Beam Test Data
  • Multi-Axial Failure Models for Fiber-Reinforced Composites
  • Fundamental Frequency Testing of Segmental Retaining Wall (SRW) Specimens: Test Considerations
  • Petrography: Distinguishing Natural Cement from Other Binders in Historical Masonry Construction Using Forensic Microscopy Techniques
  • Effect of Entrained Air on Recycled Concrete Prasoperties
  • Evaluation of the Chinese Accelerated Test for Alkali-Carbonate Reaction
  • Investigation into the Effects of Materials and Mixing Procedures on Air Void Characteristics of Fresh Concrete Using Air Void Analyzer (AVA)
  • Passing Ability Tester for Self-Consolidating Concrete
  • Effect of Aggregate Particle Size on Determining Alkali-Silica Reactivity by Accelerated Tests
  • Practical Means for Determination of the Tensile Behavior of Ultra-High Performance Concrete
  • Quantifying the Influence of Specimen Geometry on the Results of the Restrained Ring Test
  • Mechanical Properties of ASR-Affected Concrete Containing Fine or Coarse Reactive Aggregates
  • Enhancing the Reliability of Evaluating Chloride Ingress in Concrete Using the ASTM C 1202 Rapid Chloride Penetrability Test
  • The Effect of Aggregate Gradation on Engineering Properties of High Performance Concrete
  • Statistical Significance of the Restrained Slab Test for Quantifying Plastic Cracking in Fiber Reinforced Concrete
  • Durability Performance of Bridge Concretes, Part I: High Performance Concrete (HPC)
  • Durability Performance of Bridge Concretes, Part II: High-Strength Concrete (HSC)
  • Performance of a New Co-Polymer Sulfonate-Based Mid-Range Water-Reducing Admixture
  • Effects of Proposed Well-Graded Aggregate Gradations on Frost Durability of Concrete
  • Investigation into Flow Property Measurements of Low-Slump Concrete Using Vibrating Slope Apparatus (VSA)
  • Effects of Vacuum Processing on Strength and Surface Hardness Properties of Concrete
  • Effects of C3A and Mineral Admixtures on the Sulfate Attack Using ASTM C 1012
  • Hydration Behavior of Portland Cements with Different Hemihydrate/Gypsum Ratios in the Presence of Common Chemical Admixtures
  • The Role of Friction in Post-Crack Energy Absorption of Fiber Reinforced Concrete in the Round Panel Test
  • A New Test Method for Porosity Measurements of Portland Cement Pervious Concrete

Geotechnical Testing Journal

  • Effects of a Fracture on Ultrasonic Wave Velocity and Attenuation in a Homogeneous Medium
  • Strength Criteria Based on Shear Failure Planes and Test Verification on Loess
  • Uncertainty-Based Analysis for Agreement of Tensile-Strength Measurement Procedures
  • Characterization of Piezoelectric Accelerometers Beyond the Nominal Frequency Range
  • Condition Assessment of Cementitious Materials Using Surface Waves in Ultrasonic Frequency Range

Journal of Testing and Evaluation

  • Acid Treatment Technique for Determining the Mortar Content of Recycled Concrete Aggregates
  • A Study on the Residual Fatigue Strain and Damage of Steel Fiber Reinforced Recycled Concrete Under Constant Amplitude Flexural Fatigue Loading
  • Effect of Steel Fibers and Thermal Cycles on Fracture Properties of Ultra-High-Performance Concrete
  • Analysis of Support Apparatus for Flexural Load-Deflection Testing: Minimizing Bias Caused by Arching Forces
  • Shrinkage-induced Damage Evolution for Concrete Overlay
  • Properties of Asphalt Mixtures Containing Various Fibers
  • Using Disturbed State Concept to Predict the Stress–Strain Response of Concrete Attacked by Sulfate
  • Sensing Properties of Carbon Nanotube–Carbon Fiber/Cement Nanocomposites
  • Time Zero Value Based on S-Wave Reflection Loss Measurement for Early Age Shrinkage Monitoring of Cementitious Specimens Subjected to Sealed and Unsealed Curing Conditions
  • System Identification of a Reinforced Concrete Building Using the Complex Mode Indicator Function and the Hilbert Transform Techniques
  • Discussion on “Influence of Feedback Control on Flexural Toughness of Fiber Reinforced Concrete in ASTM C1399 Tests,” by N. Banthia, S. Mindess, and Z. Jiang
  • Response to Discussion of “Influence of Feedback Control on Flexural Toughness of Fiber Reinforced Concrete in ASTM C1399 Tests” by N. Banthia, S. Mindess, and Z. Jiang
  • Corrosion of Rebar and Role of Fiber Reinforced Concrete
  • A New Round Panel Test for the Characterization of Fiber Reinforced Concrete: A Broad Experimental Study
  • Microanalysis of Recycled Coarse Aggregate and Properties of No-Fines Pervious Recycled Concrete
  • Image Analysis Technique for Monitoring Early Age Shrinkage Strains with Depth from the Top Surface of Monolithic Cementitious Prism Specimens
  • Influence of Feedback Control on Flexural Toughness of Fiber Reinforced Concrete in ASTM C1399 Tests
  • Free Shrinkage of High Performance Steel Fiber Reinforced Concrete
  • Determining Residual Ammonia in Flue Gas Conditioned Fly Ashes and Its Influence on the Pozzolanic Activity
  • Coefficients of Thermal Expansion of Concrete with Different Coarse Aggregates–Texas Data
  • Tensile Creep Test of Fiber-Reinforced Ultra-High Performance Concrete
  • Size Effects in Flexural Toughness of Fiber Reinforced Concrete
  • Effects of Base Support and Load Transfer Efficiency (LTE) on Portland Concrete Pavement Performance
  • Preliminary Evaluation of a Twist-Core Method for Estimating Concrete Strength
  • The Effect of Dual Flue Gas Conditioning on Fly Ash Characteristics
  • The Effect of Curing Regime on Pervious Concrete Abrasion Resistance
  • Adhesive-Bonded Anchorage Pullout Test to Estimate In-Place Concrete Compressive Strength
  • Effect of Portland Cement Fineness on ASTM C1260 Expansion
  • Correlations Between Depth of Water Penetration, Chloride Permeability, and Coefficient of Chloride Diffusion in Plain, Silica Fume, and Fly Ash Cement Concretes
  • Ultrasonic Testing of Concrete Structures Using Indirect Transmission
  • Field Performance Monitoring of Repair Treatments on Joint Concrete Pavements
  • Effect of Length-to-Diameter Ratio of Core Sample on Concrete Core Strength—Another Look
  • New Twist-Off Method for the Evaluation of In-Situ Strength of Concrete
  • A Very Early Strength Concrete for Highway Construction
  • New Method for Measuring Static Segregation of Self-Consolidating Concrete
  • Direct Shear Behavior of Carbon Fiber-Reinforced Polymer Laminates and Concrete
  • A Phenomenological Approach to Obtaining Correlations between Accelerated and Outdoor Exposure Test Results for Organic Materials
  • Load-Carrying Capacity Evaluation of Damaged Reinforced Concrete Structures by Dynamic Testing and Finite-Element Model Updating
  • Quantifying the Confidence Levels of Deformation Measurements in Asphalt Concrete
  • Estimation of Stress Field Near a Notch Root of 3-D Structures with a Few Strain Data and the Body Force Method
  • Static and Dynamic Behavior of Damaged Concrete and Granite in Compression
  • A Performance Evaluation of Lightweight Non-Contact Pavement Profilers
  • Evaluation of the Gavarti Associates-Comprehensive Abrasion Tester
  • Reexamination of ASTM C 1202—Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration
  • Effects of Silica Fume and Steel Fibers on Some Mechanical Properties of High-Strength Fiber-Reinforced Concrete
  • The Dynamic Behavior and Vibration Monitoring of Reinforced Concrete Beams
  • A Servo-Control System for the Universal Panel Tester
  • Specimen Size Effects on the Diametrical Mechanical Testing of Cylindrical Asphalt Mixes
  • An Analysis of Creep and Shrinkage in Mortars
  • Bond Tests of Fiberglass-Reinforced Plastic Bars in Concrete
  • Flow and Stability Limits for Six-Inch-Diameter Marshall Specimens
  • Using Microwave Measurements to Detect Moisture in Asphaltic Concrete
  • Introduction to Symposium on Radiation Shielding for the 21st Century
  • Properties of High-Density Concrete
  • Shield Verification Testing at the Idaho Chemical Processing Plant — Fuel Processing Facility
  • Comparison of Fine Particle Colemanite and Boron Frit in Concrete for Time-Strength Relationship
  • Discussion of “Design and Analysis of Jaw Crusher Gouging Abrasion Tests”
  • Design and Analysis of Jaw Crusher Gouging Abrasion Tests
  • Precompressed Concrete Corbels
  • Shear Transfer in Concrete and Polymer Modified Concrete Members Subjected to Shearing Loads
  • Measuring the Abrasion of Transparent Materials with Hazemeters
  • Holographic Interferometry Study of Chemical Bond of Concrete to Smooth Steel Rods
  • Use of Pelletized Slag in Concrete Masonry Units
  • Random Axial Loading of Short Reinforced Laterized Concrete Columns
  • The Effect of Orientation on the Analysis of Shape and Texture of Concrete Aggregates by the Modified Fourier Method
  • Concrete Core Strength—The Effect of Length to Diameter Ratio
  • Structural Strength of Short, Axially Loaded Columns of Reinforced, Laterized Concrete
  • Properties of Florida-Oolite Concrete
  • The Effect of Water Content on the Compressive Strength of Laterized Concrete
  • Early Assessment of Concrete Quality by Accelerating Compressive Strength Development with Heat (Results of ASTM’s Cooperative Test Program)
  • Holographic Interferometry for Measuring Swelling of Hardened Concrete
  • A Simple Accelerated Strength Test for Portland Cements
  • Effect of Various Accelerating Chemical Admixtures on Setting and Strength Development of Concrete
  • The Strength of Concrete Subjected to Compression-Compression-Tension Stress Systems
  • Discussion of “The Effect of Cement Properties and the Thermal Compatibility of Aggregates on the Strength of Accelerated Cured Concrete” by D. F. Orchard, R. Jones, and R. S. Al-Rawi
  • Closure to “Discussion of ‘The Effect of Cement Properties and the Thermal Compatibility of Aggregates on the Strength of Accelerated Cured Concrete’ by Katharine Mather and Bryant Mather” by D. F. Orchard, R. Jones, and R. S. Al-Rawi
  • Waste Glass as Coarse Aggregate for Concrete
  • The Effects of Composition and Fineness of Cement in Accelerated Testing of Concrete
  • The Effect of Cement Properties and the Thermal Compatibility of Aggregates on the Strength of Accelerated Cured Concrete
  • Mechanical Properties of Epoxy Impregnated Concrete
  • One-Dimensional Consolidation of Retarded Plastic Concrete

Journal of Materials Performance and Characterization (MPC)

  • Evaluation of Thermal Stability and Thermal Properties of Neem/Banyan Reinforced Hybrid Polymer Composite
  • Improving the Abrasion Resistance of Concrete to Mitigate Concrete Crosstie Rail Seat Deterioration (RSD)
  • Statistical Analysis of Fly Ash Sampling Frequency

Journal of Advances in Civil Engineering Materials (ACEM)

  • Precision Statements for the Surface Resistivity of Water Cured Concrete Cylinders in the Laboratory
  • Assessment of Thixotropy of Fresh Mortars by Triaxial and Unconfined Compression Testing
  • A Comparative Study of the Mechanical Behavior of Normal-Strength and High-Strength Concrete
  • Variability Analysis of the Bulk Resistivity Measured Using Concrete Cylinders
  • Diagnosis of Concrete Quality by Structural Analysis
  • An Experimental Study on Bond Strength of Reinforcing Steel in High-Volume Fly-Ash Concrete
  • Influence of Test Machine Control Method on Apparent Performance of ASTM C1550 Fiber Reinforced Concrete Panels
  • Effect of UV and UV–Ozone Treatment of Polyolefin Fibers on Toughness of Fiber Concrete Composite
  • Influence of Reinforcement Characteristics on Non-Linear Performance Evaluation of Confined Beam-Column Joints Under Cyclic Loading
  • Applicability of the Accelerated Mortar Bar Test for Alkali-Silica Reactivity of Recycled Concrete Aggregates
  • Properties of Concrete With Crumb Rubber Replacing Fine Aggregates (Sand)
  • Effect of Fly Ash on the Shear Strength of Concrete Beams Without Shear Reinforcement
  • Precision Statements for the Surface Resistivity of Water Cured Concrete Cylinders in the Laboratory
  • Assessment of Thixotropy of Fresh Mortars by Triaxial and Unconfined Compression Testing
  • A Comparative Study of the Mechanical Behavior of Normal-Strength and High-Strength Concrete
  • Variability Analysis of the Bulk Resistivity Measured Using Concrete Cylinders
  • Diagnosis of Concrete Quality by Structural Analysis
  • An Experimental Study on Bond Strength of Reinforcing Steel in High-Volume Fly-Ash Concrete
  • Influence of Test Machine Control Method on Apparent Performance of ASTM C1550 Fiber Reinforced Concrete Panels
  • Effect of UV and UV–Ozone Treatment of Polyolefin Fibers on Toughness of Fiber Concrete Composite
  • Influence of Reinforcement Characteristics on Non-Linear Performance Evaluation of Confined Beam-Column Joints Under Cyclic Loading
  • Applicability of the Accelerated Mortar Bar Test for Alkali-Silica Reactivity of Recycled Concrete Aggregates
  • Properties of Concrete With Crumb Rubber Replacing Fine Aggregates (Sand)
  • Effect of Fly Ash on the Shear Strength of Concrete Beams Without Shear Reinforcement
  • Precision Statements for the Surface Resistivity of Water Cured Concrete Cylinders in the Laboratory
  • Assessment of Thixotropy of Fresh Mortars by Triaxial and Unconfined Compression Testing
  • A Comparative Study of the Mechanical Behavior of Normal-Strength and High-Strength Concrete
  • Variability Analysis of the Bulk Resistivity Measured Using Concrete Cylinders
  • Diagnosis of Concrete Quality by Structural Analysis
  • An Experimental Study on Bond Strength of Reinforcing Steel in High-Volume Fly-Ash Concrete
  • Influence of Test Machine Control Method on Apparent Performance of ASTM C1550 Fiber Reinforced Concrete Panels
  • Effect of UV and UV–Ozone Treatment of Polyolefin Fibers on Toughness of Fiber Concrete Composite
  • Influence of Reinforcement Characteristics on Non-Linear Performance Evaluation of Confined Beam-Column Joints Under Cyclic Loading
  • Applicability of the Accelerated Mortar Bar Test for Alkali-Silica Reactivity of Recycled Concrete Aggregates
  • Properties of Concrete With Crumb Rubber Replacing Fine Aggregates (Sand)
  • Effect of Fly Ash on the Shear Strength of Concrete Beams Without Shear Reinforcement
  • Precision Statements for the Surface Resistivity of Water Cured Concrete Cylinders in the Laboratory
  • Assessment of Thixotropy of Fresh Mortars by Triaxial and Unconfined Compression Testing
  • A Comparative Study of the Mechanical Behavior of Normal-Strength and High-Strength Concrete
  • Variability Analysis of the Bulk Resistivity Measured Using Concrete Cylinders
  • Diagnosis of Concrete Quality by Structural Analysis
  • An Experimental Study on Bond Strength of Reinforcing Steel in High-Volume Fly-Ash Concrete
  • Influence of Test Machine Control Method on Apparent Performance of ASTM C1550 Fiber Reinforced Concrete Panels
  • Effect of UV and UV–Ozone Treatment of Polyolefin Fibers on Toughness of Fiber Concrete Composite
  • Influence of Reinforcement Characteristics on Non-Linear Performance Evaluation of Confined Beam-Column Joints Under Cyclic Loading
  • Applicability of the Accelerated Mortar Bar Test for Alkali-Silica Reactivity of Recycled Concrete Aggregates
  • Properties of Concrete With Crumb Rubber Replacing Fine Aggregates (Sand)
  • Effect of Fly Ash on the Shear Strength of Concrete Beams Without Shear Reinforcement
  • Precision Statements for the Surface Resistivity of Water Cured Concrete Cylinders in the Laboratory
  • Assessment of Thixotropy of Fresh Mortars by Triaxial and Unconfined Compression Testing
  • A Comparative Study of the Mechanical Behavior of Normal-Strength and High-Strength Concrete
  • Variability Analysis of the Bulk Resistivity Measured Using Concrete Cylinders
  • Diagnosis of Concrete Quality by Structural Analysis
  • An Experimental Study on Bond Strength of Reinforcing Steel in High-Volume Fly-Ash Concrete
  • Influence of Test Machine Control Method on Apparent Performance of ASTM C1550 Fiber Reinforced Concrete Panels
  • Effect of UV and UV–Ozone Treatment of Polyolefin Fibers on Toughness of Fiber Concrete Composite
  • Influence of Reinforcement Characteristics on Non-Linear Performance Evaluation of Confined Beam-Column Joints Under Cyclic Loading
  • Applicability of the Accelerated Mortar Bar Test for Alkali-Silica Reactivity of Recycled Concrete Aggregates
  • Properties of Concrete With Crumb Rubber Replacing Fine Aggregates (Sand)
  • Effect of Fly Ash on the Shear Strength of Concrete Beams Without Shear Reinforcement
  • Precision Statements for the Surface Resistivity of Water Cured Concrete Cylinders in the Laboratory
  • Assessment of Thixotropy of Fresh Mortars by Triaxial and Unconfined Compression Testing
  • A Comparative Study of the Mechanical Behavior of Normal-Strength and High-Strength Concrete
  • Variability Analysis of the Bulk Resistivity Measured Using Concrete Cylinders
  • Diagnosis of Concrete Quality by Structural Analysis
  • An Experimental Study on Bond Strength of Reinforcing Steel in High-Volume Fly-Ash Concrete
  • Influence of Test Machine Control Method on Apparent Performance of ASTM C1550 Fiber Reinforced Concrete Panels
  • Effect of UV and UV–Ozone Treatment of Polyolefin Fibers on Toughness of Fiber Concrete Composite
  • Influence of Reinforcement Characteristics on Non-Linear Performance Evaluation of Confined Beam-Column Joints Under Cyclic Loading
  • Applicability of the Accelerated Mortar Bar Test for Alkali-Silica Reactivity of Recycled Concrete Aggregates
  • Properties of Concrete With Crumb Rubber Replacing Fine Aggregates (Sand)
  • Effect of Fly Ash on the Shear Strength of Concrete Beams Without Shear Reinforcement

Asphalt Publications

Asphalt is more than just a material; it’s the foundation of our roadways and a key component in our transportation networks. The ASTM Digital Library offers a wealth of knowledge on asphalt, from its composition and environmental impact to the latest in paving techniques and recycled materials.

ASTM standards ensure that your projects are not only high-quality but also environmentally conscious and efficient. With the ASTM Digital Library, you have direct access to groundbreaking research and best practices, enabling your organization to innovate and excel in road construction and maintenance.

The expertise and insights from industry leaders in our resources are invaluable, providing your business with the tools to navigate the evolving landscape of asphalt technology. Invest in the future of your projects with the ASTM Digital Library, and drive your business forward on the road to success.

petridish

Asphalt Publications on Digital Library

Special Technical Publications

  • STP 1469 Performance Tests for Hot Mix Asphalt (HMA) Including Fundamental and Empirical Procedures
  • STP 1433 Constructing Smooth Hot Mix Asphalt (HMA) Pavements
  • STP 1412 Aggregate Contribution to Hot Mix Asphalt Performance
  • STP 1378 Hot Mix Asphalt Construction: Certification and Accreditation Programs
  • STP 1348 Flexible Pavement Rehabilitation and Maintenance
  • STP 1322 Progress of Superpave (Superior Performing Asphalt Pavement):Evaluation and Implementation
  • STP 1299 Quality Management of Hot Mix Asphalt
  • STP 1265 Engineering Properties of Asphalt Mixtures and the Relationship to Performance
  • STP 1241 Physical Properties of Asphalt Cement Binders
  • STP 1225 Vehicle-Road Interaction
  • STP 1198 Nondestructive Testing of Pavements and Backcalculation of Moduli, 2nd Volume
  • STP 1193 Use of Waste Materials in Hot-Mix Asphalt
  • STP 1164 Vehicle, Tire, Pavement Interface
  • STP 1147 Effects of Aggregates and Mineral Fillers on Asphalt Mixture Performance
  • STP 1108 Polymer Modified Asphalt Binders
  • STP 1100 Extending the Life of Bridges
  • STP 1079 Asphalt Emulsions
  • STP 1041 Asphalt Concrete Mix Design: Development of More Rational Approaches
  • STP 1026 Nondestructive Testing of Pavements and Backcalculation of Moduli
  • STP 1016 Implication of Aggregates in the Design, Construction, and Performance of Flexible Pavements
  • STP 941 Asphalt Rheology: Relationship to Mixture
  • STP 899 Evaluation and Prevention of Water Damage to Asphalt Pavement Materials
  • STP 881 Pavement Maintenance and Rehabilitation
  • STP 829 Placement and Compaction of Asphalt Mixtures
  • STP 807 Properties of Flexible Pavement Materials
  • STP 774 Extending Aggregate Resources
  • STP 763 Pavement Surface Characteristics and Materials
  • STP 724 Asphalt Pavement Construction: New Materials and Techniques
  • STP 709 Quality Assurance in Pavement Construction
  • STP 662 Recycling of Bituminous Pavements
  • STP 628 Low-Temperature Properties of Bituminous Materials and Compacted Bituminous Paving Mixtures
  • STP 561 Fatigue and Dynamic Testing of Bituminous Mixtures
  • STP 532 Viscosity Testing of Asphalt and Experience with Viscosity Graded Specifications
  • STP 508 Fatigue of Compacted Bituminous Aggregate Mixtures
  • STP 461 Rapid Test Methods for the Determination of Bitumen Content in Bituminous Mixtures
  • STP 424 Grading of Paving Asphalts by Viscosity at 140 F Versus Penetration at 77 F
  • STP 362 Statistical Methods for Quality Control of Road and Paving Materials
  • STP 354 Railroad Materials and Facilities Research
  • STP 328 Symposium on Fundamental Viscosity of Bituminous Materials
  • STP 294 Papers on Road and Paving Materials (Bituminous) — 1960
  • STP 277 Symposium on Road and Paving Materials: 1959
  • STP 252 Bituminous Paving Materials
  • STP 240 Symposium on Effect of Water on Bituminous Paving Mixtures
  • STP 212 Road and Paving Materials
  • STP 191 Symposium on Specific Gravity of Bituminous Coated Aggregates
  • STP 83 Symposium on Mineral Aggregates

Journal of ASTM International

  • Influence of Recovery Processes on Properties of Binders and Aggregates Recovered from Recycled Asphalt Pavement
  • Evaluation of Measured and Estimated Dynamic Moduli for Selected Asphalt Mixes
  • Incorporation of Property-Based Testing in Coarse Aggregate Specifications for Pavement Applications
  • Criterion Test for Method Selection in Determining the Bulk Specific Gravity of Hot-Mix Asphalt
  • Realistic Approach for Enhancing Reliability of Pavement Surface Friction Testing
  • Effect of Dynamic Aircraft Gear Loads on Asphalt Concrete Strain Responses
  • The Effects of Construction Variability on the Superpave Simple Performance Test
  • Superpave and the Aggregate Industry
  • A Comprehensive Examination of the Internal Angle of Gyration for the Superpave Gyratory Compactor
  • Tweaking the System: Modifications to the Superpave Mix Design System
  • Simulative Performance Test for Hot Mix Asphalt Using Asphalt Pavement Analyzer
  • Dynamic Modulus Testing of Thin Pavement Cores
  • Assessing the Precision of Falling Weight Deflectometer for Field Measurements
  • Laboratory Investigation of HMA Performance Using Hamburg Wheel Tracking and DSR Torsional Creep Tests
  • Characterization of Asphalt Concrete by Multi-Stage True Triaxial Testing
  • Mechanistic Quality Management of Hot Mix Asphalt Layers with Seismic Methods
  • Obtaining Creep Compliance Parameters Accurately from Static or Cyclic Creep Tests
  • An Overview of Fundamental and Simulative Performance Tests for Hot Mix Asphalt
  • Use of HMA Stiffness Results as a Referee Test in Indiana
  • Utilization of an Asphalt Pavement Analyzer for Hot Mix Asphalt Laboratory Mix Design
  • C-φ Characterization Model for Design of Asphalt Mixtures and Asphalt Pavements
  • Fracture Resistance Characterization of Superpave Mixtures Using the Semi-Circular Bending Test
  • Field Validation of Superpave Shear Test on NCAT Test Track
  • Identification of a Physical Model to Evaluate Rutting Performance of Asphalt Mixtures
  • ASTM C 88 Test on Soundness of Aggregate Using Sodium Sulfate or Magnesium Sulfate: A Study of the Mechanisms of Damage

Journal of Materials Performance and Characterization (MPC)

  • Evaluation on High Temperature Rheological Properties of Nano-Montmorillonite Modified Asphalt Binder

Journal of Advances in Civil Engineering Materials (ACEM)

  • Quantification of Uncertainty in the Master Curves of Viscoelastic Properties of Asphalt Concrete
  • Comparative Studies on Performance of Bituminous Mixes Containing Laboratory Developed Hard Grade Bitumen
  • Shear-Property-Based Design Approach of Asphalt Mixture in Long and Steep Sections—Taking Togo No. 1 Highway as a Case
  • Effect of Pavement Condition Monitoring Frequency with Unequal Interval on Determining Pavement Service Life
  • Development and Performance Analysis of Stiffening Gussasphalt
  • Uniformity, Repeatability, and Permanent Deformation Resistance of Slabs Produced with the Linear Asphalt Compactor
  • Refining Conditions of Fatigue Testing of Hot Mix Asphalt
  • Large-Scale Direct Shear Testing of Recycled Construction and Demolition Materials
  • Laboratory Evaluation of Recycled Concrete Aggregate and Recycled Clay Masonry Blends in Pavement Applications
  • Using Linear Viscoelastic Modeling to Evaluate the Low Temperature Properties of Asphalt Mixtures Prepared With Aggregates of Different Sizes
  • Evaluating Recycled Concrete Aggregate as Hot Mix Asphalt Aggregate
  • New Approach for Selecting Crumb-Rubber-Modified Asphalts for Rutting and Permanent Deformation Resistance
  • Comparison of Laboratory and Field Aging Properties of Different Asphalt Binders

Geotechnical Testing Journal

  • Investigating Stress Dependency of Unbound Layers Using Falling-Weight Deflectometer and Resilient Modulus Tests
  • Modeling Long-Term Deformations of Unbound Pavement Materials Using the Miniaturized Pressuremeter Creep Data
  • Correlations between Laboratory Dynamic CBR and Compaction Parameters of Unbound Coarse Aggregate for Base Courses
  • An Underwater Plate Load Testing for the Sand Compaction Pile Ground at Island-Tunnel Conversion Area
  • Stress-Strain Response and Dilation of Geogrid-Reinforced Coarse-Grained Soils in Large-Scale Direct Shear Tests
  • Investigating Stress Dependency of Unbound Layers Using Falling-Weight Deflectometer and Resilient Modulus Tests
  • Modeling Long-Term Deformations of Unbound Pavement Materials Using the Miniaturized Pressuremeter Creep Data
  • Correlations between Laboratory Dynamic CBR and Compaction Parameters of Unbound Coarse Aggregate for Base Courses
  • An Underwater Plate Load Testing for the Sand Compaction Pile Ground at Island-Tunnel Conversion Area
  • Stress-Strain Response and Dilation of Geogrid-Reinforced Coarse-Grained Soils in Large-Scale Direct Shear Tests
  • Investigating Stress Dependency of Unbound Layers Using Falling-Weight Deflectometer and Resilient Modulus Tests
  • Modeling Long-Term Deformations of Unbound Pavement Materials Using the Miniaturized Pressuremeter Creep Data

Journal of Testing and Evaluation

  • Mechanistic Evaluation of the Effect of WMA Additives on Wettability and Moisture Susceptibility Properties of Asphalt Mixes
  • Investigation of Delamination on I-65 in Indiana
  • Rheological Behavior of Asphalt–Rubber Binders Modified With Shale-Oil Residue and Polyphosphoric Acid
  • A Re-Look at the Asphalt Mixture Performance Test Protocols and Computational Algorithms
  • Engineering Properties of Prime Coats Applied to a Granular Base
  • Development of a Composite Specimen Interface Cracking (CSIC) Test for Top-Down Cracking
  • Effect of Temperature and Frequency on Visco-Elastic Dynamic Response of Asphalt Mixture
  • Rheological Characterization of Asphalt Concrete Using a Shear Box
  • Toward Development of a New Thermal Cracking Test Using the Dynamic Shear Rheometer
  • Effectiveness of Asphalt Rejuvenator
  • A Laboratory Study to Predict the Rutting and Fatigue Behavior of Asphalt Concrete Using the Indirect Tensile Test
  • Calibration of Seal Coat Application Rate Design
  • Thermal Cracking Potential of High RAP-WMA Evaluated With Bending Beam Rheometer Mixture Beam Test
  • Use of Sweep Test for Emulsion and Hot Asphalt Chip Seals: Laboratory and Field Evaluation
  • Evaluation of Asphalt Blended With Low Percentage of Carbon Micro-Fiber and Nanoclay
  • Exploration of a Performance Test for Emulsion Treated Asphalt Surfaces
  • Rate- and Temperature-Dependent Fracture Characteristics of Asphaltic Paving Mixtures
  • Fatigue Analysis of Asphalt Concrete under Indirect Tensile Mode of Loading Using Crack Images
  • Behavior of Selected Warm Mix Asphalt Additive Modified Binders and Prediction of Dynamic Modulus of the Mixes
  • Performance Evaluation of Asphalt-Rubber Stone Matrix Asphalt Mixtures with Warm Mix Asphalt Additives
  • Field Performance Assessment of Porous Asphalt Pavement Under Heavy Traffic on Yan-Tong Expressway in China
  • The Temperature Measuring and Evaluating Methods Based on Infrared Thermal Image for Asphalt-Pavement Construction
  • A New High Rutting Resistance Asphalt Mixture for Intersection Maintenance under Heavy Traffic
  • Effect of Vehicle Speed on the Millau Viaduct Response
  • Pavement Performance of Asphalt Surface Course Containing Reclaimed Asphalt Pavement (RAP)
  • Interrelationship between Tire Contact Stress and Longitudinal Construction Joint Layout in Pavement
  • Viscoelastic Performance Analysis of Sulfur-Modified Asphalt Mixture
  • Effect of Magnesium Sulfate on the Unconfined Compressive Strength of Cement-Treated Soils
  • State of the Art of Asphalt Surfacings on Long-spanned Orthotropic Steel Decks in China
  • Study on the Curing Process of Epoxy Asphalt
  • Virtual Triaxial Test Simulation Based on Discrete Element Method for Shear Resistance Property Assessment of Asphalt Mixtures
  • Effects of Type and Content of Mineral Fillers on the Consistency Properties of Asphalt Mastic
  • Investigation into High-Temperature Stability of Asphalt Pavement
  • Gradation Design of the Aggregate Skeleton in Asphalt Mixture
  • Relationship between Degree of Anisotropy of Asphalt Concrete and Its Geometrical Parameters
  • Study of Expressway Axle Load Spectrum Based on Toll Data of Jinghu Expressway
  • Analysis of the Low-Temperature Rheological Properties of Rubberized Warm Mix Asphalt Binders
  • A New “Mix-confined” Repeated Load Test for Evaluating Permanent Deformation of Asphalt Mixture
  • Aging Behaviour and Mechanism of SBS-Modified Asphalt
  • Research on ERS Steel Deck Pavement Techniques
  • Laboratory Test and Numerical Simulation of Bond Performance between Basalt Fiber Reinforced Polymer Rebar and Concrete
  • Choice of Crack Repairing Material for Asphalt Pavement Based on AHP
  • A Study of the Semi-Perpetual Pavement Performance in Queensland
  • Research on the Design of AR-AC13S Mixtures
  • Characterization of Asphalt Mixture Homogeneity Based on X-ray Computed Tomography
  • Research on Design Method for Heavy-Duty Asphalt Pavements and Its Application
  • Rutting Mechanism Analysis of Heavy-duty Asphalt Pavement Based on Pavement Survey, Finite Element Simulation, and Instrumentation
  • Evaluation of Performance on Crumb-Rubber-Modified Asphalt Mixture
  • Performance Characterization of Bituminous Mixtures With Dolomite Sand Waste and BOF Steel Slag
  • Analysis of Colombian Bitumen Modified With a Nanocomposite
  • Preface
  • Fatigue Crack Assessment of Asphalt Concrete Pavement on a Single Span Highway Bridge Subjected to a Moving Truck
  • Mechanical Characteristics of Asphaltic Mixtures Containing Titanium-Dioxide Photocatalyst
  • Comparison of Dynamic Moduli for Asphalt Mixtures Determined from Different Geometries and Compactions
  • Performance Evaluation of SBS Modified Asphalt with Different Anti-aging Additives
  • Nonlinear Response Characterization of Bituminous Mortar
  • Effect of Layered Double Hydroxides (LDHs) on Aging Properties of Bitumen
  • Comparative Study on Laboratory Performance of Hot- and Warm-mix Asphalt Mixtures
  • Degradation Behavior and Mechanism of HMA Aggregate
  • Evaluation of Epoxy Asphalt Concrete Damping Parameters Using Impact Resonance Test
  • Application of Sessile Drop Method to Determine Surface Free Energy of Asphalt and Aggregate
  • Research on Structural Performance of Conductive Asphalt Pavement Buried Tubes in Moving Load
  • High-Temperature Viscosity Performance of Crumb-Rubber-Modified Binder With Warm Mix Asphalt Additives
  • A Study on Photo-thermal Coupled Aging Kinetics of Bitumen
  • Effectiveness of Solar Heat Reflective Coatings in Reducing Asphalt Concrete Temperature
  • Evaluating Laboratory Compaction of Asphalt Mixtures Using the Shear Box Compactor
  • Mechanical Impedance Measurement on Thin Layer Surface With Impedance Hammer Device
  • Study on the Intrinsic Viscosity of Bitumen Containing Organo Montmorillonite Nanoclay
  • Effect of Phase-Change Materials on Thermal and Mechanical Properties of Asphalt Mixtures
  • Application of the Steam Aging Method to Evaluate the Long-Term Performance of Secondary Materials for Road Construction
  • A Comparison Study of Friction Measurements for Chip Seal
  • Laboratory Evaluation of Warm Mix Asphalt Influence on Theoretical Maximum Specific Gravity
  • Correlation of Flow Number with Stiffness Obtained from Dynamic Shear Rheometer Testing of Extracted Binder from Asphalt Concrete Containing Recycled Asphalt Pavement
  • Comprehensive Evaluation of Small Strain Viscoelastic Behavior of Asphalt Concrete
  • Comparison of Shape Parameters for Selected Coarse Aggregates in Oklahoma
  • Estimation of Optimum Compaction Temperature for PMA and WMA Mixtures by Volumetric Property Evaluation
  • The Creep Testing Apparatus (CRETA): A New Testing Device for Measuring the Viscoelasticity of Joint Sealant
  • Evaluation of Air Void Distributions of Cement Asphalt Emulsion Mixes Using an X-Ray Computed Tomography Scanner
  • Effects of Additives for Warm Mix Asphalt on Performance Grades of Asphalt Binders
  • A Practical Dynamic Modulus Testing Protocol
  • Evaluation of Various Test Devices for the Measurements of Aggregates and Asphalt Mixtures’ Specific Gravity
  • Effects of an Amine Anti-Stripping Agent on Moisture Susceptibility of Sasobit and Aspha-Min Mixes by Surface Free Energy Analysis
  • Rheological and Rutting Characterization of Asphalt Mixes with Modified Binders
  • Research of Bituminous MortarFatigue Test Method Based on Dynamic Shear Rheometer
  • Effect of Silicone Maintenance Materials on Asphalt Binders and Mixtures
  • Modified Ignition Oven Test Procedure for Determination of Binder Content in Hot Mix Asphalt Containing Dolomite Aggregate
  • Analysis of Rutting Performance Impacting Factors in HMA Overlay Mixture Design
  • Development of Specification Limits for Asphalt Pavements Based on Quality Control and Quality Assurance Data
  • Evaluation of the Fracture Resistance of Asphalt Mixtures Based on Bilinear Cohesive Zone Model
  • Guide on the Selection of Appropriate Laboratory Stress Levels for the Flow Number Test
  • CT Image Entropy Analysis Technique for the Determination of Damage to Indirect Tensile Test of Asphalt Mixtures
  • Effects of Moist Aggregates on the Performance of Warm Mix Asphalt Mixtures Containing Non-Foaming Additives
  • Correlation Analyses for Implementation of Binder Properties for Rut Potential Estimation of Asphalt Mixtures
  • Response Behavior of Asphalt Mixtures at Low Temperatures Under Varying Indirect Tensile Test Loading Conditions
  • Performance Evaluation of Recycled PMA Binders Containing Warm Mix Asphalt Additives
  • Evaluation of High Temperature Rheological Characteristics of Asphalt Binder with Carbon Nano Particles
  • Effect of Cement Kiln Dust and Rock Dust as Mineral Fillers on Bulk Specific Gravity of Fine Aggregates
  • Automated Measurements of Road Cracks Using Line-Scan Imaging
  • Application of Statistical Methods in Evaluating Asphalt Mixture Homogeneity
  • Evaluation of the Effects of Asphalt Binder on the Properties of Hot Mix Asphalt at Intermediate Temperatures
  • Development of a Flattened Indirect Tension Test for Asphalt Concrete
  • Energy Based Laboratory Fatigue Failure Criteria for Asphalt Materials
  • Evaluation of Warm Mix Asphalt Mixtures Containing RAP Using Accelerated Loading Tests
  • Laboratory Investigation of Fatigue Characteristics of Rubberized Asphalt Mixtures Containing Warm Asphalt Additives at a Low Temperature
  • A New Laboratory Evaluation Method for the Adhesive Performance of Crack Sealants
  • Laboratory Evaluation of Stone Matrix Asphalt Mixtures with Polyethylene and Cellulose Stabilizers
  • Development of a Crack Sealant Adhesion Test (CSADT) Specification for Hot-Poured Bituminous Sealants
  • Application of Dynamic Compaction for Poorly Compacted Embankment
  • A New Static Strength Test for Characterization of Rutting of Dense-Graded Asphalt Mixtures
  • Fatigue and Stiffness Evaluations of Reclaimed Asphalt Pavement in Hot Mix Asphalt Mixtures
  • Alternative Procedure for Determination of Hot Mix Asphalt Creep Compliance
  • Evaluation of Statistical Validity of Some Asphalt Binder Grade Systems
  • Geometrical Evaluation and Experimental Verification to Determine Representative Volume Elements of Heterogeneous Asphalt Mixtures
  • Comparative Study on Recovered Binder Properties Using Three Asphalt Emulsion Recovery Methods
  • Modeling the Effects of Temperature and Loading Rate on Fatigue Property of Asphalt Binder
  • Mechanical Behavior of Nanoclay Modified Asphalt Mixtures
  • Evaluation of Reclaimed Polyethylene-Modified Asphalt Pavements
  • Using Limited Purchase Specification Tests to Perform Full Linear Viscoelastic Characterization of Asphalt Binder
  • Methods for Determining the Solubility Parameter of Bitumen
  • Evaluation of Fiber-Reinforced Asphalt Mixtures Using Advanced Material Characterization Tests
  • Lessons Learned from RAP Sections with 17 Years of Service
  • Characterization of the Tensile Properties of Open Graded Friction Course Mixtures Based on Direct and Indirect Tension Tests
  • A Comparison of Warm Asphalt Binder Aging with Laboratory Aging Procedures
  • Laboratory Measurement of the Actual Tire-Pavement Contact Pressure Using a Static Test Device
  • Energy-Based Approach for Determining Flow Number
  • Evaluation of Engineering Properties of Rubberized Laboratory Mixes Containing Warm Mix Additives
  • Evaluating Parameters for Characterization of Cracking in Asphalt Concrete
  • Comparison of Linear Visco-Elastic Complex Modulus and Yield Shear Stress in DSR Moisture Damage Test
  • Effects of Various Long-Term Aging Procedures on the Rheological Properties of Laboratory Prepared Rubberized Asphalt Binders
  • Studying of the Dynamic Behavior of Water in a Vibrating Tank
  • Connected Air Voids Content in Permeable Friction Course Mixtures
  • Method of Compaction has Significant Effects on Stress-Strain Behavior of Hydraulic Asphalt Concrete
  • Effects of Binders on Resilient Modulus of Rubberized Mixtures Containing RAP Using Artificial Neural Network Approach
  • Evaluation of Semicircular Bending Test for Determining Tensile Strength and Stiffness Modulus of Asphalt Mixtures
  • Determination of Volumetric Properties for Permeable Friction Course Mixtures
  • Effects of Densification on Permeable Friction Course Mixtures
  • Influence of Selected Mix Design Factors on the Thermal Behavior of Lightweight Aggregate Asphalt Mixes
  • Evaluating the Shear Resistance of Hot Mix Asphalt by the Direct Shear Test
  • Forensic Investigation of Mechanically Stabilized Earth (MSE) Approaches
  • Determination of Price Reduction Factors for Density-Deficient Asphalt Pavements
  • A Simple and Effective Laboratory Test Device for Measuring Tire-Pavement Contact Pressure
  • Interpretation of Complex Modulus Test Results for Asphalt-Aggregate Mixes
  • Measurement and Evaluation of Asphalt Concrete Thermal Expansion and Contraction
  • Suitability of Dynamic and Relaxation Tests for the Evaluation of Moisture Susceptibility of Asphalt Mixtures
  • Characterization of Louisiana Asphalt Mixtures Using Simple Performance Tests
  • Evaluation of Friction Performance of Coarse Aggregates and Hot-Mix Asphalt Pavements
  • Experimental Study for Evaluating Crack Retardation of Asphalt Concrete Overlays
  • Evaluate the Simple Surface Energy of Aggregates Using the Capillary Rise Method
  • Evaluation of Nonnuclear Density Tests on Hot Mix Asphalt Segregation
  • Using Rolling Dynamic Deflectometer and Overlay Tester to Determine the Reflective Cracking Potential
  • Relationship of Aggregate Microtexture to Asphalt Pavement Skid Resistance
  • Development of a Viscosity Specification for Hot-Poured Bituminous Sealants
  • Characterization of Thermal Degradation ofqa Liquid Amine Anti-Strip Additives in Asphaltqa Binders Due to RTFO and PAV-Aging
  • Development of Double Edge Notched Tension (DENT) Test for Asphalt Binders
  • Methodology of Assessing Testing Variation for Volumetric Quantities in Hot Mix Asphalt Production
  • Laboratory-based Unified Permanent Deformation Model for Hot-Mix Asphalt Mixtures
  • Dynamic Modulus of Asphalt Mixtures for Development of Korean Pavement Design Guide
  • Quantification of Coarse Aggregate Surface Texture Using Image Analysis
  • Deicer Salt Scaling Resistance of Concrete Containing Manufactured Sands
  • Effect of Quarry Production Process on Specific Gravities of Aggregates
  • Effect of Antistrip Additives on Surface Free Energy Characteristics of Asphalt Binders for Moisture-Induced Damage Potential
  • Characterizing the Asphalt-Aggregate Mixtures Using Rheological Properties of Asphalt Binders
  • Device Harmonization to Determine Smoothness Specification for Asphalt Pavements
  • A Procedure to Quantify Organic Antistrip Additives in Asphalt Binders and Mixes
  • Effect of Bitumen Acid Number on Moisture Susceptibility of Asphalt Mixtures
  • Application of 3D Laser Scanning on Measuring Pavement Roughness
  • A Study on Properties of Foamed-Asphalt-Treated Mixes
  • Utilization of Steel Slag Aggregate for Road Bases
  • Effects of Air Void Size Distribution, Pore Pressure, and Bond Energy on Moisture Damage
  • Field and Laboratory Properties of Lime-Treated Cold In-Place Recycled Asphalt Pavements
  • Development of a Single-Edge Notched Beam Test for Asphalt Concrete Mixtures
  • Evaluation of Stripping in Bituminous Mixtures Using Conventional and Image Processing Techniques
  • Estimation of Surface Macrotexture in Hot Mix Asphalt Concrete Pavements Using Laser Texture Data
  • Analysis of Variability in Pay Factor Systems and Sampling Methods
  • Quantification of Potentially Odorous Volatile Organic Compounds from Asphalt Binders Using Head-Space Gas Chromatography
  • Determination of Thermal Properties of Asphalt Mixtures
  • Influence of Pavement Surface Type on Tire/Pavement Generated Noise
  • Piezoelectric Sensors for Weigh-In-Motion Systems: An Experimental Insight into Edge Effects
  • Influence of Hysteretic Heating on Asphalt Fatigue Characterization
  • Comparative Statistical Analysis of Original and Aged Bituminous Material Viscosity
  • Mechanistic-Empirical Characterization of Bonding Between Ultra-Thin White-Topping and Asphalt Pavement
  • An Alternate Method to Determine Asphalt Content of Hot Mix Asphalt Using Volumetric Properties
  • Evaluation Indicator of Asphalt Mixture Rutting Susceptibility
  • Porosity of Asphalt Concrete Made With Waste Shredded-Tire Rubber-Modified Binders
  • Design and Performance of the HEART Wheel Load Simulator
  • Testing of Bridge Weigh-In-Motion System in a Sub-Arctic Climate
  • Investigation of Effects of Testing Methods on Characterization of Asphalt Concrete
  • Influence of the Geometry of the Extrusion Die on the Melt Strength of Polymers
  • Development of a Procedure to Determine the Effectiveness of Asphalt-Removing Solvents
  • Optimal Quality Characteristic Evaluation for Asphalt Mixing Plants
  • Measurement of Aggregate Texture and its Influence on Hot Mix Asphalt (HMA) Permanent Deformation
  • Spatial and Directional Distribution of Aggregates in Asphalt Mixes
  • Enhancement of Asphalt Pavement Evaluation Using Monte Carlo Simulation and Accelerated Pavement Testing
  • Effect of Anisotropy on Compressive and Tensile Properties of Asphalt Mixtures
  • Influence of Hot-Mix Asphalt Parameters on the Correction Factors of the Ignition Oven Test
  • Correlating Permanent Deformation Characteristics of Hot Mix Asphalt with Aggregate Geometric Irregularities
  • The Influence of Laboratory Aging Method on the Rheological Properties of Asphalt Binders
  • Quantification of Coarse Aggregate Shape and Its Effect on Engineering Properties of Hot-Mix Asphalt Mixtures
  • Coarse Aggregate Shape and Size Properties Using a New Image Analyzer
  • Superpave Shear Tester as a Simple Standardized Measure to Evaluate Aggregate-Asphalt Mixture Performance
  • Evaluation of Density Gradients in Loaded Wheel Tester Samples
  • Falling-Weight Deflectometer Sensor Location in the Backcalculation of Concrete Pavement Moduli
  • Network-Level Pavement Deflection Testing and Structural Evaluation
  • Laboratory Measurements and Analysis of Clogging Mechanism of Porous Asphalt Mixes
  • Identifying Segregation in Hot Mix Asphalt Pavements Using Rolling Nuclear Gage Measurements and Infrared Imaging
  • Precision of ASTM D 5821 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
  • Comparison and Evaluation of Tests for Coarse Aggregate Particle Shape, Angularity, and Surface Texture
  • Effect of Asphalt Mix Design Method on Binder and Gradation Selection
  • Adapting Superpave Technology to Design of Hot Recycled Mixes
  • Relating Triaxial Test Properties of Asphalt Mixtures to Mix Parameters Determined by Marshall Stability Test
  • Development of a Road Roughness Profile Delineation Procedure
  • First Continuous Remote Bridge Monitoring System Ensures Safe Operation of 65-Year-Old Rolling Bascule Bridge
  • Determination of Thermal Properties of Pavement Materials and Unbound Aggregates by Transient Heat Conduction
  • Cyclic Tests on High-Strength Prestressed Concrete Frames
  • Precision of Marshall Stability and Flow Test Using 6-in. (152.4-mm) Diameter Specimens
  • An Analysis of Hot Mix Asphalt Mat Density Measurements
  • Comparison of Asphalt Contents Measured with the Nuclear Gage and Extraction Methods
  • Solvent-Free, Nuclear-Free Determination of Asphalt Content and Gradation of Hot-Mix Asphalt Concrete
  • An Evaluation of Several Techniques for Measuring Air-void Content in Asphalt Concrete Specimens
  • Analysis of Marshall Test Behavior with Triaxial Test Determined Material Properties
  • The Effect of Moisture on Laboratory-Prepared Asphalt Mixtures
  • Laboratory Wheel Tracking Apparatus for Bituminous Pavement Studies
  • Comparison of Methods for Measuring Moisture Content of Aggregate and Asphalt-Aggregate Paving Mixtures
  • Nondestructive Testing: Interpretation of Deflection Bowl for Falling Weight Deflectometer Tests on Flexible Pavements
  • Additives for Bitumen in Road Construction
  • Dynamic Properties of Asphalt Concrete
  • A Suggested Methodology for the Analysis of Asphalt Age-Hardening
  • A Rapid Test for Asphalt Content of Bituminous Mixtures
  • A Comprehensive Viscoelasto-Plastic Characterization of Sand-Asphalt Compressive and Tensile Cyclic Loading
  • Rheology of Cold-Recycled Pavement Materials Using Creep Test
  • Analysis of Nonlinear Behavior of Asphalt Concrete During Marshall Test
  • Experimental Analysis and Numerical Simulation of Marshall Method of Asphalt Concrete Mix Design
  • Laboratory Testing of Asphalt Concrete for Porous Pavements
  • Quality Control of Tests Conducted on Bituminous Mixtures in Quebec
  • Void Content Prediction in Two-Size Aggregate Mixes
  • A Review of Aggregate Selection Criteria for Improved Wear Resistance and Skid Resistance of Bituminous Surfaces
  • A Modified Procedure for Measuring the Maximum Specific Gravity of Bituminous Paving Mixtures
  • The Polishing Characteristics of Common Rock Types Used as Aggregate in Bituminous Pavement Surfaces
  • A Method for the Determination of the Surface Area of Fine Aggregate in Bituminous Mixtures
  • Behavior of Aggregate in the Washington Degradation Test
  • Concept and Test Method for a Unified Characterization of the Geometric Irregularity of Aggregate Particles
  • Red Mud from Alumina Plants as a Possible Source of Synthetic Aggregate
  • Asphalt Cements: Pen-Vis Number and Its Application to Moduli of Stiffness
  • Nonlinear Viscoelastic Properties of Bituminous Concretes
  • Determination of Low Levels of Chloride in Hardened Portland Cement Paste, Mortar, and Concrete
  • Glass Transition of Asphalts Under Pressure
  • A Study of Currently Used Methods for Determining the Permeability of Bituminous Mixtures
  • A Microscopic Approach to the Microstructure of Paving Asphalts

For More Information

Contact Us
ventas@astm.org