ASTM Standards in Spanish

List of ASTM Standards In Spanish

Below is a list of all ASTM standards currently translated into Spanish. Gain easy access to the standards you choose. ASTM Standards are available in PDF or online through our cloud based standards solution, ASTM Compass®.

With Compass you’ll get tools for adding notes, images and attachments along with a sharing functions to help pass on and preserve corporate knowledge. You can also use color-coded highlighting that identifies changes to standards.

For more information on PDF or digital access to any of our translated standards, contact us.

Book a Meeting With ASTM International
petridish

ASTM Standards Available in Spanish

  • ASTM A0006 Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
  • ASTM A36 Specification for Carbon Structural Steel
  • ASTM A53 Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
  • ASTM A82 Specification for Steel Wire, Plain, for Concrete Reinforcement
  • ASTM A105 Specification for Carbon Steel Forgings for Piping Applications
  • ASTM A106 Specification for Seamless Carbon Steel Pipe for High-Temperature Service
  • ASTM A182 Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
  • ASTM A184 Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
  • ASTM A185 Specification for Steel Welded Wire Reinforcement, Plain, for Concrete
  • ASTM A193 Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
  • ASTM A194 Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
  • ASTM A240 Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
  • ASTM A242 Specification for High-Strength Low-Alloy Structural Steel
  • ASTM A276 Specification for Stainless Steel Bars and Shapes
  • ASTM A307 Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60000 PSI Tensile Strength
  • ASTM A312 Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
  • ASTM A320 Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
  • ASTM A370 Test Methods and Definitions for Mechanical Testing of Steel Products
  • ASTM A380 Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
  • ASTM A388 Practice for Ultrasonic Examination of Steel Forgings
  • ASTM A416 Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
  • ASTM A421 Specification for Stress-Relieved Steel Wire for Prestressed Concrete
  • ASTM A497 Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete
  • ASTM A500 Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
  • ASTM A501 Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
  • ASTM A568 Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
  • ASTM A572 Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
  • ASTM A588 Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
  • ASTM A615 Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
  • ASTM A706 Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
  • ASTM A709 Specification for Structural Steel for Bridges
  • ASTM A722 Specification for High-Strength Steel Bars for Prestressed Concrete
  • ASTM A767 Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
  • ASTM A775 Specification for Epoxy-Coated Steel Reinforcing Bars
  • ASTM A820 Specification for Steel Fibers for Fiber-Reinforced Concrete
  • ASTM A884 Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
  • ASTM A934 Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
  • ASTM A955 Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement
  • ASTM A956 Test Method for Leeb Hardness Testing of Steel Products
  • ASTM A970 Specification for Headed Steel Bars for Concrete Reinforcement
  • ASTM A992 Specification for Structural Steel Shapes
  • ASTM A996 Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
  • ASTM A1011 Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
  • ASTM A1022 Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
  • ASTM A1038 Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
  • ASTM A1044 Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
  • ASTM A1055 Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
  • ASTM A1060 Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
  • ASTM A1064 Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
  • ASTM A1085 Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
  • ASTM B19 Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
  • ASTM B117 Practice for Operating Salt Spray (Fog) Apparatus
  • ASTM B193 Test Method for Resistivity of Electrical Conductor Materials
  • ASTM B258 Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
  • ASTM B557 Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
  • ASTM B566 Specification for Copper-Clad Aluminum Wire
  • ASTM C29 Test Method for Bulk Density (Unit Weight) and Voids in Aggregate
  • ASTM C31 Practice for Making and Curing Concrete Test Specimens in the Field
  • ASTM C33 Specification for Concrete Aggregates
  • ASTM C39 Test Method for Compressive Strength of Cylindrical Concrete Specimens
  • ASTM C40 Test Method for Organic Impurities in Fine Aggregates for Concrete
  • ASTM C42 Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
  • ASTM C67 Test Methods for Sampling and Testing Brick and Structural Clay Tile
  • ASTM C78 Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
  • ASTM C88 Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
  • ASTM C90 Specification for Loadbearing Concrete Masonry Units
  • ASTM C91 Specification for Masonry Cement
  • ASTM C94 Specification for Ready-Mixed Concrete
  • ASTM C109 Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
  • ASTM C114 Test Methods for Chemical Analysis of Hydraulic Cement
  • ASTM C117 Test Method for Materials Finer than 75-m (No. 200) Sieve in Mineral Aggregates by Washing
  • ASTM C123 Test Method for Lightweight Particles in Aggregate
  • ASTM C127 Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate
  • ASTM C128 Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
  • ASTM C131 Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
  • ASTM C136 Test Method for Sieve Analysis of Fine and Coarse Aggregates
  • ASTM C138 Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
  • ASTM C140 Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
  • ASTM C142 Test Method for Clay Lumps and Friable Particles in Aggregates
  • ASTM C143 Test Method for Slump of Hydraulic-Cement Concrete
  • ASTM C144 Specification for Aggregate for Masonry Mortar
  • ASTM C150 Specification for Portland Cement
  • ASTM C151 Test Method for Autoclave Expansion of Hydraulic Cement
  • ASTM C157 Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
  • ASTM C172 Practice for Sampling Freshly Mixed Concrete
  • ASTM C173 Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
  • ASTM C183 Practice for Sampling and the Amount of Testing of Hydraulic Cement
  • ASTM C185 Test Method for Air Content of Hydraulic Cement Mortar
  • ASTM C187 Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
  • ASTM C188 Test Method for Density of Hydraulic Cement
  • ASTM C191 Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
  • ASTM C192 Practice for Making and Curing Concrete Test Specimens in the Laboratory
  • ASTM C204 Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
  • ASTM C219 Terminology Relating to Hydraulic and Other Inorganic Cements
  • ASTM C231 Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C260 Specification for Air-Entraining Admixtures for Concrete
  • ASTM C266 Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
  • ASTM C270 Specification for Mortar for Unit Masonry
  • ASTM C305 Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • ASTM C311 Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
  • ASTM C330 Specification for Lightweight Aggregates for Structural Concrete
  • ASTM C332 Specification for Lightweight Aggregates for Insulating Concrete
  • ASTM C425 Specification for Compression Joints for Vitrified Clay Pipe and Fittings
  • ASTM C430 Test Method for Fineness of Hydraulic Cement by the 45-m (No. 325) Sieve
  • ASTM C451 Test Method for Early Stiffening of Hydraulic Cement (Paste Method)
  • ASTM C470 Specification for Molds for Forming Concrete Test Cylinders Vertically
  • ASTM C471 No Title Found – Please check Designation
  • ASTM C472 Test Methods for Physical Testing of Gypsum, Gypsum Plasters, and Gypsum Concrete
  • ASTM C490 Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
  • ASTM C494 Specification for Chemical Admixtures for Concrete
  • ASTM C496 Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
  • ASTM C511 Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
  • ASTM C535 Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
  • ASTM C566 Test Method for Total Evaporable Moisture Content of Aggregate by Drying
  • ASTM C567 Test Method for Determining Density of Structural Lightweight Concrete
  • ASTM C579 Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
  • ASTM C595 Specification for Blended Hydraulic Cements
  • ASTM C596 Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
  • ASTM C604 Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
  • ASTM C617 Practice for Capping Cylindrical Concrete Specimens
  • ASTM C618 Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
  • ASTM C685 Specification for Concrete Made by Volumetric Batching and Continuous Mixing
  • ASTM C702 Practice for Reducing Samples of Aggregate to Testing Size
  • ASTM C778 Specification for Standard Sand
  • ASTM C780 Test Methods for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
  • ASTM C802 Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
  • ASTM C845 Specification for Expansive Hydraulic Cement
  • ASTM C876 Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
  • ASTM C940 Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
  • ASTM C989 Specification for Slag Cement for Use in Concrete and Mortars
  • ASTM C1005 Specification for Reference Masses and Devices for Determining Mass and Volume for Use in Physical Testing of Hydraulic Cements
  • ASTM C1012 Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
  • ASTM C1017 Specification for Chemical Admixtures for Use in Producing Flowing Concrete
  • ASTM C1019 Test Method for Sampling and Testing Grout for Masonry
  • ASTM C1038 Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
  • ASTM C1064 Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
  • ASTM C1077 Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
  • ASTM C1157 Performance Specification for Hydraulic Cement
  • ASTM C1170 Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
  • ASTM C1218 Test Method for Water-Soluble Chloride in Mortar and Concrete
  • ASTM C1222 Practice for Evaluation of Laboratories Testing Hydraulic Cement
  • ASTM C1231 Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens
  • ASTM C1240 Specification for Silica Fume Used in Cementitious Mixtures
  • ASTM C1252 Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
  • ASTM C1260 Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
  • ASTM C1314 Test Method for Compressive Strength of Masonry Prisms
  • ASTM C1325 Specification for Fiber-Mat Reinforced Cementitious Backer Units
  • ASTM C1328 Specification for Plastic (Stucco) Cement
  • ASTM C1365 Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
  • ASTM C1437 Test Method for Flow of Hydraulic Cement Mortar
  • ASTM C1506 Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
  • ASTM C1552 Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
  • ASTM C1602 Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
  • ASTM C1610 Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
  • ASTM C1611 Test Method for Slump Flow of Self-Consolidating Concrete
  • ASTM C1621 Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
  • ASTM C1670 Specification for Adhered Manufactured Stone Masonry Veneer Units
  • ASTM C1702 Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
  • ASTM C1712 Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test
  • ASTM C1758 Practice for Fabricating Test Specimens with Self-Consolidating Concrete
  • ASTM C7042 No Title Found – Please check Designation
  • ASTM D5 Test Method for Penetration of Bituminous Materials
  • ASTM D56 Test Method for Flash Point by Tag Closed Cup Tester
  • ASTM D75 Practice for Sampling Aggregates
  • ASTM D86 Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
  • ASTM D92 Test Method for Flash and Fire Points by Cleveland Open Cup Tester
  • ASTM D93 Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
  • ASTM D94 Test Methods for Saponification Number of Petroleum Products
  • ASTM D95 Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
  • ASTM D97 Test Method for Pour Point of Petroleum Products
  • ASTM D129 Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)
  • ASTM D130 Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
  • ASTM D156 Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
  • ASTM D189 Test Method for Conradson Carbon Residue of Petroleum Products
  • ASTM D217 Test Methods for Cone Penetration of Lubricating Grease
  • ASTM D240 Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
  • ASTM D256 Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
  • ASTM D287 Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer/Method)
  • ASTM D297 Test Methods for Rubber ProductsChemical Analysis
  • ASTM D323 Test Method for Vapor Pressure of Petroleum Products (Reid Method)
  • ASTM D381 Test Method for Gum Content in Fuels by Jet Evaporation
  • ASTM D412 Test Methods for Vulcanized Rubber and Thermoplastic ElastomersTension
  • ASTM D413 Test Methods for Rubber PropertyAdhesion to Flexible Substrate
  • ASTM D430 Test Methods for Rubber DeteriorationDynamic Fatigue
  • ASTM D445 Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
  • ASTM D446 Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers
  • ASTM D473 Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
  • ASTM D482 Test Method for Ash from Petroleum Products
  • ASTM D524 Test Method for Ramsbottom Carbon Residue of Petroleum Products
  • ASTM D525 Test Method for Oxidation Stability of Gasoline (Induction Period Method)
  • ASTM D611 Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
  • ASTM D613 Test Method for Cetane Number of Diesel Fuel Oil
  • ASTM D624 Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
  • ASTM D629 Test Methods for Quantitative Analysis of Textiles
  • ASTM D638 Test Method for Tensile Properties of Plastics
  • ASTM D648 Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
  • ASTM D664 Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • ASTM D665 Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
  • ASTM D698 Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3))
  • ASTM D746 Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
  • ASTM D790 Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
  • ASTM D792 Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
  • ASTM D813 Test Method for Rubber DeteriorationCrack Growth
  • ASTM D847 Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons
  • ASTM D848 Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons
  • ASTM D849 Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
  • ASTM D850 Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
  • ASTM D874 Test Method for Sulfated Ash from Lubricating Oils and Additives
  • ASTM D882 Test Method for Tensile Properties of Thin Plastic Sheeting
  • ASTM D887 Practices for Sampling Water-Formed Deposits
  • ASTM D892 Test Method for Foaming Characteristics of Lubricating Oils
  • ASTM D945 Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
  • ASTM D974 Test Method for Acid and Base Number by Color-Indicator Titration
  • ASTM D975 Specification for Diesel Fuel
  • ASTM D976 Test Method for Calculated Cetane Index of Distillate Fuels
  • ASTM D1003 Test Method for Haze and Luminous Transmittance of Transparent Plastics
  • ASTM D1052 Test Method for Measuring Rubber DeteriorationCut Growth Using Ross Flexing Apparatus
  • ASTM D1059 Test Method for Yarn Number Based on Short-Length Specimens
  • ASTM D1070 Test Methods for Relative Density of Gaseous Fuels
  • ASTM D1071 Test Methods for Volumetric Measurement of Gaseous Fuel Samples
  • ASTM D1072 Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
  • ASTM D1141 Practice for Preparation of Substitute Ocean Water
  • ASTM D1142 Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
  • ASTM D1159 Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration
  • ASTM D1160 Test Method for Distillation of Petroleum Products at Reduced Pressure
  • ASTM D1193 Specification for Reagent Water
  • ASTM D1209 Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
  • ASTM D1230 Test Method for Flammability of Apparel Textiles
  • ASTM D1238 Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
  • ASTM D1250 Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils: API MPMS Chapter 11.1
  • ASTM D1265 Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
  • ASTM D1266 Test Method for Sulfur in Petroleum Products (Lamp Method)
  • ASTM D1267 Test Method for Gauge Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
  • ASTM D1278 Test Methods for Rubber from Natural SourcesChemical Analysis
  • ASTM D1293 Test Methods for pH of Water
  • ASTM D1298 Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  • ASTM D1319 Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
  • ASTM D1322 Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
  • ASTM D1349 Practice for RubberStandard Conditions for Testing
  • ASTM D1356 Terminology Relating to Sampling and Analysis of Atmospheres
  • ASTM D1357 Practice for Planning the Sampling of the Ambient Atmosphere
  • ASTM D1401 Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
  • ASTM D1424 Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
  • ASTM D1434 Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
  • ASTM D1492 Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration
  • ASTM D1500 Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
  • ASTM D1505 Test Method for Density of Plastics by the Density-Gradient Technique
  • ASTM D1506 Test Methods for Carbon BlackAsh Content
  • ASTM D1508 Test Method for Carbon Black, Pelleted Fines and Attrition
  • ASTM D1509 Test Methods for Carbon BlackHeating Loss
  • ASTM D1510 Test Method for Carbon BlackIodine Adsorption Number
  • ASTM D1512 Test Methods for Carbon BlackpH Value
  • ASTM D1513 Test Method for Carbon Black, PelletedPour Density
  • ASTM D1514 Test Method for Carbon BlackSieve Residue
  • ASTM D1544 Test Method for Color of Transparent Liquids (Gardner Color Scale)
  • ASTM D1556 Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method
  • ASTM D1557 Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
  • ASTM D1577 Test Methods for Linear Density of Textile Fibers
  • ASTM D1613 Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
  • ASTM D1623 Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
  • ASTM D1635 Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
  • ASTM D1655 Specification for Aviation Turbine Fuels
  • ASTM D1657 Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
  • ASTM D1683 Test Method for Failure in Sewn Seams of Woven Fabrics
  • ASTM D1688 Test Methods for Copper in Water
  • ASTM D1709 Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
  • ASTM D1796 Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
  • ASTM D1826 Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
  • ASTM D1831 Test Method for Roll Stability of Lubricating Grease
  • ASTM D1835 Specification for Liquefied Petroleum (LP) Gases
  • ASTM D1838 Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
  • ASTM D1840 Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM D1907 Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
  • ASTM D1914 Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
  • ASTM D1922 Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
  • ASTM D1945 Test Method for Analysis of Natural Gas by Gas Chromatography
  • ASTM D1946 Practice for Analysis of Reformed Gas by Gas Chromatography
  • ASTM D1988 Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D2007 Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
  • ASTM D2061 Test Methods for Strength Tests for Zippers
  • ASTM D2062 Test Methods for Operability of Zippers
  • ASTM D2158 Test Method for Residues in Liquefied Petroleum (LP) Gases
  • ASTM D2163 Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
  • ASTM D2171 Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
  • ASTM D2216 Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
  • ASTM D2240 Test Method for Rubber PropertyDurometer Hardness
  • ASTM D2256 Test Method for Tensile Properties of Yarns by the Single-Strand Method
  • ASTM D2261 Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
  • ASTM D2265 Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
  • ASTM D2270 Practice for Calculating Viscosity Index from Kinematic Viscosity at 40C and 100C
  • ASTM D2272 Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
  • ASTM D2276 Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
  • ASTM D2354 Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
  • ASTM D2386 Test Method for Freezing Point of Aviation Fuels
  • ASTM D2412 Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
  • ASTM D2419 Test Method for Sand Equivalent Value of Soils and Fine Aggregate
  • ASTM D2420 Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
  • ASTM D2457 Test Method for Specular Gloss of Plastic Films and Solid Plastics
  • ASTM D2464 Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
  • ASTM D2487 Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
  • ASTM D2500 Test Method for Cloud Point of Petroleum Products and Liquid Fuels
  • ASTM D2555 Practice for Establishing Clear Wood Strength Values
  • ASTM D2594 Test Method for Stretch Properties of Knitted Fabrics Having Low Power
  • ASTM D2598 Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
  • ASTM D2622 Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ASTM D2624 Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
  • ASTM D2699 Test Method for Research Octane Number of Spark-Ignition Engine Fuel
  • ASTM D2700 Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
  • ASTM D2709 Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
  • ASTM D2713 Test Method for Dryness of Propane (Valve Freeze Method)
  • ASTM D2839 Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
  • ASTM D2887 Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
  • ASTM D2896 Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
  • ASTM D2950 Test Method for Density of Asphalt Mixtures in Place by Nuclear Methods
  • ASTM D2982 Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
  • ASTM D2983 Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
  • ASTM D3078 Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
  • ASTM D3107 Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
  • ASTM D3162 Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM D3172 Practice for Proximate Analysis of Coal and Coke
  • ASTM D3174 Test Method for Ash in the Analysis Sample of Coal and Coke from Coal
  • ASTM D3195 Practice for Rotameter Calibration
  • ASTM D3212 Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
  • ASTM D3227 Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
  • ASTM D3228 Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
  • ASTM D3230 Test Method for Salts in Crude Oil (Electrometric Method)
  • ASTM D3231 Test Method for Phosphorus in Gasoline
  • ASTM D3237 Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
  • ASTM D3241 Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
  • ASTM D3242 Test Method for Acidity in Aviation Turbine Fuel
  • ASTM D3244 Practice for Utilization of Test Data to Determine Conformance with Specifications
  • ASTM D3338 Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
  • ASTM D3343 Test Method for Estimation of Hydrogen Content of Aviation Fuels
  • ASTM D3418 Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
  • ASTM D3427 Test Method for Air Release Properties of Hydrocarbon Based Oils
  • ASTM D3492 Specification for Rubber Contraceptives (Male Condoms)
  • ASTM D3512 Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
  • ASTM D3577 Specification for Rubber Surgical Gloves
  • ASTM D3588 Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
  • ASTM D3606 Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography
  • ASTM D3609 Practice for Calibration Techniques Using Permeation Tubes
  • ASTM D3614 Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions
  • ASTM D3670 Guide for Determination of Precision and Bias of Methods of Committee D22
  • ASTM D3700 Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
  • ASTM D3701 Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry
  • ASTM D3704 Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion
  • ASTM D3774 Test Method for Width of Textile Fabric
  • ASTM D3775 Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics
  • ASTM D3776 Test Methods for Mass Per Unit Area (Weight) of Fabric
  • ASTM D3786 Test Method for Bursting Strength of Textile FabricsDiaphragm Bursting Strength Tester Method
  • ASTM D3787 Test Method for Bursting Strength of TextilesConstant-Rate-of-Traverse (CRT) Ball Burst Test
  • ASTM D3801 Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
  • ASTM D3828 Test Methods for Flash Point by Small Scale Closed Cup Tester
  • ASTM D3850 Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
  • ASTM D3895 Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
  • ASTM D3939 Test Method for Snagging Resistance of Fabrics (Mace)
  • ASTM D3948 Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
  • ASTM D3956 Specification for Methane Thermophysical Property Tables
  • ASTM D3977 Test Methods for Determining Sediment Concentration in Water Samples
  • ASTM D3984 Specification for Ethane Thermophysical Property Tables
  • ASTM D4006 Test Method for Water in Crude Oil by Distillation
  • ASTM D4007 Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
  • ASTM D4052 Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D4057 Practice for Manual Sampling of Petroleum and Petroleum Products
  • ASTM D4084 Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
  • ASTM D4172 Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)
  • ASTM D4177 Practice for Automatic Sampling of Petroleum and Petroleum Products
  • ASTM D4189 Test Method for Silt Density Index (SDI) of Water
  • ASTM D4239 Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
  • ASTM D4291 Test Method for Trace Ethylene Glycol in Used Engine Oil
  • ASTM D4294 Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
  • ASTM D4298 Guide for Intercomparing Permeation Tubes to Establish Traceability
  • ASTM D4308 Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
  • ASTM D4318 Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
  • ASTM D4362 Specification for Propane Thermophysical Property Tables
  • ASTM D4377 Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
  • ASTM D4453 Practice for Handling of High Purity Water Samples
  • ASTM D4517 Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
  • ASTM D4529 Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
  • ASTM D4530 Test Method for Determination of Carbon Residue (Micro Method)
  • ASTM D4539 Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
  • ASTM D4569 Test Method for Rubber Compounding MaterialsDetermination of Acidity in Sulfur
  • ASTM D4571 Test Methods for Rubber Compounding MaterialsDetermination of Volatile Material
  • ASTM D4628 Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
  • ASTM D4629 Test Method for Trace Nitrogen in Liquid Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
  • ASTM D4650 Specification for Normal Butane Thermophysical Property Tables
  • ASTM D4651 Specification for Isobutane Thermophysical Property Tables
  • ASTM D4683 Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150C
  • ASTM D4684 Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
  • ASTM D4703 Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
  • ASTM D4718 Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
  • ASTM D4735 Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography
  • ASTM D4737 Test Method for Calculated Cetane Index by Four Variable Equation
  • ASTM D4739 Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
  • ASTM D4740 Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
  • ASTM D4741 Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D4761 Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials
  • ASTM D4784 Specification for Liquefied Natural Gas Density Calculation Models
  • ASTM D4791 Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
  • ASTM D4806 Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
  • ASTM D4807 Test Method for Sediment in Crude Oil by Membrane Filtration
  • ASTM D4809 Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
  • ASTM D4810 Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D4814 Specification for Automotive Spark-Ignition Engine Fuel
  • ASTM D4815 Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
  • ASTM D4846 Test Method for Resistance to Unsnapping of Snap Fasteners
  • ASTM D4860 Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
  • ASTM D4865 Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
  • ASTM D4870 Test Method for Determination of Total Sediment in Residual Fuels
  • ASTM D4883 Test Method for Density of Polyethylene by the Ultrasound Technique
  • ASTM D4888 Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D4891 Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion
  • ASTM D4927 Test Methods for Elemental Analysis of Lubricant and Additive ComponentsBarium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
  • ASTM D4928 Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
  • ASTM D4929 Test Method for Determination of Organic Chloride Content in Crude Oil
  • ASTM D4944 Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
  • ASTM D4951 Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
  • ASTM D4964 Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
  • ASTM D4966 Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
  • ASTM D4970 Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester
  • ASTM D4984 Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D5001 Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
  • ASTM D5002 Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
  • ASTM D5006 Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
  • ASTM D5034 Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
  • ASTM D5035 Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
  • ASTM D5128 Test Method for On-Line pH Measurement of Water of Low Conductivity
  • ASTM D5132 Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles
  • ASTM D5133 Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • ASTM D5134 Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography
  • ASTM D5173 Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide
  • ASTM D5184 Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
  • ASTM D5185 Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
  • ASTM D5186 Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels By Supercritical Fluid Chromatography
  • ASTM D5188 Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)
  • ASTM D5191 Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)
  • ASTM D5194 Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons
  • ASTM D5278 Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)
  • ASTM D5287 Practice for Automatic Sampling of Gaseous Fuels
  • ASTM D5291 Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
  • ASTM D5293 Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between 10C and 35C Using Cold-Cranking Simulator
  • ASTM D5305 Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor
  • ASTM D5391 Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
  • ASTM D5443 Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200 C by Multi-Dimensional Gas Chromatography
  • ASTM D5452 Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
  • ASTM D5453 Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
  • ASTM D5454 Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
  • ASTM D5481 Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
  • ASTM D5492 Test Method for Determination of Xylene Solubles in Propylene Plastics
  • ASTM D5501 Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography
  • ASTM D5504 Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
  • ASTM D5519 Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
  • ASTM D5542 Test Methods for Trace Anions in High Purity Water by Ion Chromatography
  • ASTM D5580 Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
  • ASTM D5587 Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
  • ASTM D5599 Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
  • ASTM D5623 Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
  • ASTM D5630 Test Method for Ash Content in Plastics
  • ASTM D5708 Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
  • ASTM D5755 Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
  • ASTM D5762 Test Method for Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
  • ASTM D5769 Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
  • ASTM D5771 Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)
  • ASTM D5772 Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)
  • ASTM D5773 Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
  • ASTM D5800 Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5808 Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
  • ASTM D5821 Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
  • ASTM D5835 Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
  • ASTM D5842 Practice for Sampling and Handling of Fuels for Volatility Measurement
  • ASTM D5845 Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
  • ASTM D5853 Test Method for Pour Point of Crude Oils
  • ASTM D5854 Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
  • ASTM D5863 Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
  • ASTM D5949 Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
  • ASTM D5950 Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
  • ASTM D5953 No Title Found – Please check Designation
  • ASTM D5972 Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
  • ASTM D6045 Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
  • ASTM D6058 Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
  • ASTM D6060 Test Method for Sampling of Process Vents with a Portable Gas Chromatograph
  • ASTM D6079 Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
  • ASTM D6185 Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases
  • ASTM D6209 Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)
  • ASTM D6217 Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
  • ASTM D6228 Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
  • ASTM D6229 Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography
  • ASTM D6247 Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ASTM D6278 Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus
  • ASTM D6281 Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
  • ASTM D6290 Test Method for Color Determination of Plastic Pellets
  • ASTM D6299 Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
  • ASTM D6300 Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
  • ASTM D6304 Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
  • ASTM D6319 Specification for Nitrile Examination Gloves for Medical Application
  • ASTM D6348 Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D6371 Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
  • ASTM D6375 Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
  • ASTM D6377 Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx(Expansion Method)
  • ASTM D6378 Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
  • ASTM D6379 Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum DistillatesHigh Performance Liquid Chromatography Method with Refractive Index Detection
  • ASTM D6413 Test Method for Flame Resistance of Textiles (Vertical Test)
  • ASTM D6417 Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography
  • ASTM D6420 Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
  • ASTM D6423 Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends
  • ASTM D6426 Test Method for Determining Filterability of Middle Distillate Fuel Oils
  • ASTM D6443 Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
  • ASTM D6450 Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
  • ASTM D6468 Test Method for High Temperature Stability of Middle Distillate Fuels
  • ASTM D6469 Guide for Microbial Contamination in Fuels and Fuel Systems
  • ASTM D6470 Test Method for Salt in Crude Oils (Potentiometric Method)
  • ASTM D6480 Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Surface Loading by Transmission Electron Microscopy
  • ASTM D6481 Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
  • ASTM D6522 Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
  • ASTM D6550 Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography
  • ASTM D6560 Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
  • ASTM D6584 Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
  • ASTM D6591 Test Method for Determination of Aromatic Hydrocarbon Types in Middle DistillatesHigh Performance Liquid Chromatography Method with Refractive Index Detection
  • ASTM D6595 Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
  • ASTM D6620 Practice for Asbestos Detection Limit Based on Counts
  • ASTM D6667 Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D6701 Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers
  • ASTM D6708 Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
  • ASTM D6729 Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography
  • ASTM D6730 Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
  • ASTM D6749 Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
  • ASTM D6751 Specification for Biodiesel Fuel Blendstock (B100) for Middle Distillate Fuels
  • ASTM D6792 Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
  • ASTM D6797 Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
  • ASTM D6824 Test Method for Determining Filterability of Aviation Turbine Fuel
  • ASTM D6839 Test Method for Hydrocarbon Types, Oxygenated Compounds, Benzene, and Toluene in Spark Ignition Engine Fuels by Multidimensional Gas Chromatography
  • ASTM D6890 Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
  • ASTM D6897 Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
  • ASTM D6913 Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
  • ASTM D6922 Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
  • ASTM D6931 Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures
  • ASTM D6938 Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
  • ASTM D6971 Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
  • ASTM D6988 Guide for Determination of Thickness of Plastic Film Test Specimens
  • ASTM D7036 Practice for Competence of Air Emission Testing Bodies
  • ASTM D7039 Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ASTM D7042 Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D7096 Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
  • ASTM D7153 Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
  • ASTM D7154 Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
  • ASTM D7155 Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
  • ASTM D7169 Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
  • ASTM D7183 Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D7201 Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)
  • ASTM D7214 Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
  • ASTM D7220 Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
  • ASTM D7224 Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
  • ASTM D7261 Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
  • ASTM D7265 Specification for Hydrogen Thermophysical Property Tables
  • ASTM D7279 Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
  • ASTM D7318 Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
  • ASTM D7319 Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
  • ASTM D7321 Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
  • ASTM D7328 Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
  • ASTM D7345 Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
  • ASTM D7346 Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels
  • ASTM D7359 Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
  • ASTM D7371 Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
  • ASTM D7372 Guide for Analysis and Interpretation of Proficiency Test Program Results
  • ASTM D7390 Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
  • ASTM D7412 Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D7414 Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D7415 Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D7418 Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM D7419 Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection
  • ASTM D7426 Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound
  • ASTM D7440 Practice for Characterizing Uncertainty in Air Quality Measurements
  • ASTM D7459 Practice for Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources
  • ASTM D7467 Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
  • ASTM D7482 Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis
  • ASTM D7501 Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel Fuel Blendstock (B100) by Cold Soak Filtration Test (CSFT)
  • ASTM D7504 Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
  • ASTM D7508 Specification for Polyolefin Chopped Strands for Use in Concrete
  • ASTM D7521 Test Method for Determination of Asbestos in Soil
  • ASTM D7596 Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
  • ASTM D7603 Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils
  • ASTM D7622 Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
  • ASTM D7623 Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
  • ASTM D7624 Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D7647 Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
  • ASTM D7683 Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Small Test Jar Method)
  • ASTM D7688 Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation
  • ASTM D7689 Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Mini Method)
  • ASTM D7712 Terminology for Sampling and Analysis of Asbestos
  • ASTM D7752 Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids
  • ASTM D7756 Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection
  • ASTM D7757 Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ASTM D7795 Test Method for Acidity in Ethanol and Ethanol Blends by Titration
  • ASTM D7828 Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC)
  • ASTM D7833 Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography
  • ASTM D7843 Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry
  • ASTM D7861 Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
  • ASTM D7886 Practice for Asbestos Exposure Assessments for Repetitive Maintenance and Installation Tasks
  • ASTM D8004 Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing
  • ASTM D8006 Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations
  • ASTM D8009 Practice for Manual Piston Cylinder Sampling for Volatile Crude Oils, Condensates, and Liquid Petroleum Products
  • ASTM D8196 Practice for Determination of Water Activity (aw) in Cannabis Flower
  • ASTM D8197 Specification for Maintaining Acceptable Water Activity (aw) Range (0.55 to 0.65) for Dry Cannabis Flower Intended for Human/Animal Use
  • ASTM D8220 Guide for Conducting Recall/Removal Procedures for Products in the Cannabis Industry
  • ASTM D8221 Practice for Determining the Calculated Methane Number (MNC) of Gaseous Fuels Used in Internal Combustion Engines
  • ASTM D8222 Guide for Establishing a Quality Management System (QMS) for Consumer Use of Cannabis/Hemp Products
  • ASTM D8229 Guide for Corrective Action and Preventive Action (CAPA) for the Cannabis Industry
  • ASTM D8244 Guide for Analytical Laboratory Operations Supporting the Cannabis/Hemp Industry
  • ASTM D8250 Practice for Applying a Hazard Analysis Critical Control Points (HACCP) System for Cannabis Consumable Products
  • ASTM D8270 Terminology Relating to Cannabis
  • ASTM D8282 Practice for Laboratory Test Method Validation and Method Development
  • ASTM D8308 Practice for Cannabis/Hemp Operation Compliance Audits
  • ASTM D8309 Guide for Stability Testing of Cannabis-Based Products
  • ASTM D8320 Practice for Implementing an Information Security Program in a Cannabis Operation
  • ASTM D8334 Practice for Sampling of Cannabis/Hemp Post-Harvest Batches for Laboratory Analyses
  • ASTM D8343 Practice for Measuring the Physical Properties of Cannabis/Hemp Pre-rolls
  • ASTM D8357 Classification for Cannabis/Hemp Flower Vaporizers
  • ASTM D8372 Guide for Cannabis/Hemp Extract Vaporizers
  • ASTM D8374 Guide for Personal Cannabis/Hemp Plant Growing Appliances
  • ASTM D8375 Test Method for Determination of Cannabinoid Concentration in Dried Cannabis and Hemp Raw Materials using Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS)
  • ASTM D8390 Classification for Domestic Cannabis/Hemp Plant Indoor Growing Appliances
  • ASTM D8399 Test Method for Multi-residue Analysis of Pesticides in Dried Cannabis and Hemp Raw Materials Using Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS)
  • ASTM D8423 Specification for Environmental Conditions for Post-packaged Storage and Retail Merchandising of Cannabis/Hemp Flower
  • ASTM D8432 Specification for Environmental Conditions while In Transit for Packaged Cannabis/Hemp Flower
  • ASTM D8439 Specification for Medicinal-use Cannabis Inflorescence
  • ASTM D8441 Specification for International Symbol for Identifying Consumer Products Containing Intoxicating Cannabinoids
  • ASTM D8450 Specification for Environmental Conditions While Packaging Cannabis/Hemp Flower
  • ASTM E1 Specification for ASTM Liquid-in-Glass Thermometers
  • ASTM E3 Guide for Preparation of Metallographic Specimens
  • ASTM E4 Practices for Force Calibration and Verification of Testing Machines
  • ASTM E8 Test Methods for Tension Testing of Metallic Materials
  • ASTM E10 Test Method for Brinell Hardness of Metallic Materials
  • ASTM E18 Test Methods for Rockwell Hardness of Metallic Materials
  • ASTM E23 Test Methods for Notched Bar Impact Testing of Metallic Materials
  • ASTM E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
  • ASTM E77 Test Method for Inspection and Verification of Thermometers
  • ASTM E83 Practice for Verification and Classification of Extensometer Systems
  • ASTM E100 Specification for ASTM Hydrometers
  • ASTM E110 Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
  • ASTM E112 Test Methods for Determining Average Grain Size
  • ASTM E140 Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
  • ASTM E165 Practice for Liquid Penetrant Testing for General Industry
  • ASTM E171 Practice for Conditioning and Testing Flexible Barrier Packaging
  • ASTM E203 Test Method for Water Using Volumetric Karl Fischer Titration
  • ASTM E329 Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
  • ASTM E345 Test Methods of Tension Testing of Metallic Foil
  • ASTM E350 Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
  • ASTM E353 Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
  • ASTM E381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
  • ASTM E407 Practice for Microetching Metals and Alloys
  • ASTM E415 Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
  • ASTM E517 Test Method for Plastic Strain Ratio r for Sheet Metal
  • ASTM E542 Practice for Gravimetric Calibration of Laboratory Volumetric Instruments
  • ASTM E572 Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
  • ASTM E607 Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere
  • ASTM E646 Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials
  • ASTM E1012 Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
  • ASTM E1019 Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques
  • ASTM E1064 Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
  • ASTM E1085 Test Method for Analysis of Low-Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
  • ASTM E1086 Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
  • ASTM E1131 Test Method for Compositional Analysis by Thermogravimetry
  • ASTM E1137 Specification for Industrial Platinum Resistance Thermometers
  • ASTM E1251 Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
  • ASTM E1323 Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
  • ASTM E1335 Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis
  • ASTM E1368 Practice for Visual Inspection of Asbestos Abatement Projects
  • ASTM E1444 Practice for Magnetic Particle Testing for Aerospace
  • ASTM E1488 Guide for Statistical Procedures to Use in Developing and Applying Test Methods
  • ASTM E1494 Practice for Testing Physical Properties of Friable Surfacing Materials
  • ASTM E1527 Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process
  • ASTM E1739 Guide for Risk-Based Corrective Action Applied at Petroleum Release Sites
  • ASTM E1903 Practice for Environmental Site Assessments: Phase II Environmental Site Assessment Process
  • ASTM E1943 Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites
  • ASTM E1952 Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
  • ASTM E2018 Guide for Property Condition Assessments: Baseline Property Condition Assessment Process
  • ASTM E2091 Guide for Use of Activity and Use Limitations, Including Institutional and Engineering Controls
  • ASTM E2107 Practice for Environmental Regulatory Compliance Audits
  • ASTM E2129 Practice for Data Collection for Sustainability Assessment of Building Products
  • ASTM E2281 Practice for Process Capability and Performance Measurement
  • ASTM E2282 Guide for Defining the Test Result of a Test Method
  • ASTM E2309 Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines
  • ASTM E2356 Practice for Comprehensive Building Asbestos Surveys
  • ASTM E2394 Practice for Maintenance, Renovation, and Repair of Installed Asbestos Cement Products
  • ASTM E2412 Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM E2432 Guide for General Principles of Sustainability Relative to the Built Environment
  • ASTM E2489 Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
  • ASTM E2554 Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
  • ASTM E2587 Practice for Use of Control Charts in Statistical Process Control
  • ASTM E2600 Guide for Vapor Encroachment Screening on Property Involved in Real Estate Transactions
  • ASTM E2635 Practice for Water Conservation in Buildings Through In-Situ Water Reclamation
  • ASTM E2655 Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
  • ASTM E2717 Practice for Estimating the Environmental Load of Residential Wastewater
  • ASTM E2727 Practice for Assessment of Rainwater Quality
  • ASTM E2728 Guide for Water Stewardship in the Design, Construction, and Operation of Buildings
  • ASTM E2758 Guide for Selection and Use of Infrared Thermometers
  • ASTM E2790 Guide for Identifying and Complying With Continuing Obligations
  • ASTM E2844 Specification for Demonstrating That a Buildings Location Provides Access to Public Transit
  • ASTM E2856 Guide for Estimation of LNAPL Transmissivity
  • ASTM E2893 Guide for Greener Cleanups
  • ASTM E2921 Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes, Standards, and Rating Systems
  • ASTM E2935 Practice for Evaluating Equivalence of Two Testing Processes
  • ASTM E3012 Guide for Characterizing Environmental Aspects of Manufacturing Processes
  • ASTM E3027 Guide for Making Sustainability-Related Chemical Selection Decisions in the Life-Cycle of Products
  • ASTM E3123 Guide for Recognition and Derecognition of Environmental Liabilities
  • ASTM E3224 Guide for Building Energy Performance and Improvement Evaluation in the Assessment of Property Condition
  • ASTM F88 Test Method for Seal Strength of Flexible Barrier Materials
  • ASTM F316 Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test
  • ASTM F392 Practice for Conditioning Flexible Barrier Materials for Flex Durability
  • ASTM F400 Consumer Safety Specification for Lighters
  • ASTM F404 Consumer Safety Specification for High Chairs
  • ASTM F449 Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
  • ASTM F698 Specification for Physical Information to be Provided for Amusement Rides and Devices
  • ASTM F747 Terminology Relating to Amusement Rides and Devices
  • ASTM F770 Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices
  • ASTM F839 Specification for Cautionary Labeling of Portable Gasoline, Kerosene, and Diesel Containers for Consumer Use
  • ASTM F846 Guide for Testing Performance of Amusement Rides and Devices
  • ASTM F853 Practice for Maintenance Procedures for Amusement Rides and Devices
  • ASTM F883 Performance Specification for Padlocks
  • ASTM F893 Guide for Auditing Amusement Rides and Devices
  • ASTM F963 Consumer Safety Specification for Toy Safety
  • ASTM F1115 Test Method for Determining the Carbon Dioxide Loss of Beverage Containers
  • ASTM F1141 Specification for Wall Coverings
  • ASTM F1148 Consumer Safety Performance Specification for Home Playground Equipment
  • ASTM F1159 Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards
  • ASTM F1169 Consumer Safety Specification for Full-Size Baby Cribs
  • ASTM F1193 Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
  • ASTM F1292 Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment
  • ASTM F1305 Guide for Classification of Amusement Ride and Device Related Injuries and Illnesses
  • ASTM F1317 Test Method for Calibration of Microwave Ovens
  • ASTM F1346 Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs
  • ASTM F1487 Consumer Safety Performance Specification for Playground Equipment for Public Use
  • ASTM F1519 Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
  • ASTM F1566 Test Methods for Evaluation of Innersprings, Boxsprings, Mattresses or Mattress Sets
  • ASTM F1615 Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers
  • ASTM F1816 Safety Specification for Drawstrings on Childrens Upper Outerwear
  • ASTM F1867 Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
  • ASTM F1884 Test Methods for Determining Residual Solvents in Packaging Materials
  • ASTM F1886 Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection
  • ASTM F1912 Specification for Safety of Bean Bag Chairs and Bean Bag Chair Covers
  • ASTM F1917 Consumer Safety Performance Specification for Infant Bedding and Related Accessories
  • ASTM F1950 Specification for Physical Information to be Transferred With Used Amusement Rides and Devices
  • ASTM F1957 Test Method for Composite Foam Hardness-Durometer Hardness
  • ASTM F1967 Consumer Safety Specification for Infant Bath Seats
  • ASTM F1972 Guide for Terminology Relating to Candles and Associated Accessory Items
  • ASTM F1980 Guide for Accelerated Aging of Sterile Barrier Systems and Medical Devices
  • ASTM F2007 Practice for Design, Manufacture, and Operation of Concession Go-Karts and Facilities
  • ASTM F2058 Specification for Candle Fire Safety Labeling
  • ASTM F2088 Consumer Safety Specification for Infant and Cradle Swings
  • ASTM F2090 Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms
  • ASTM F2097 Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products
  • ASTM F2137 Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices
  • ASTM F2179 Specification for Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers
  • ASTM F2194 Consumer Safety Specification for Bassinets and Cradles
  • ASTM F2201 Consumer Safety Specification for Utility Lighters
  • ASTM F2245 Specification for Design and Performance of a Light Sport Airplane
  • ASTM F2250 Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials
  • ASTM F2252 Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape
  • ASTM F2285 Consumer Safety Performance Specification for Diaper Changing Tables for Commercial Use
  • ASTM F2286 Design and Performance Specification for Removable Mesh Fencing for Swimming Pools, Hot Tubs, and Spas
  • ASTM F2291 Practice for Design of Amusement Rides and Devices
  • ASTM F2295 Practice for Continued Operational Safety Monitoring of a Light Sport Aircraft
  • ASTM F2316 Specification for Airframe Emergency Parachutes
  • ASTM F2369 Safety Specification for Non-Integral Firearm Locking Devices
  • ASTM F2374 Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
  • ASTM F2376 Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems
  • ASTM F2388 Consumer Safety Specification for Baby Changing Products for Domestic Use
  • ASTM F2412 Test Methods for Foot Protection
  • ASTM F2413 Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear
  • ASTM F2456 Specification for Youth-Resistant Firearms Containers (YRFCs)
  • ASTM F2460 Practice for Special Requirements for Bumper Boats
  • ASTM F2461 Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment
  • ASTM F2475 Guide for Biocompatibility Evaluation of Medical Device Packaging Materials
  • ASTM F2483 Practice for Maintenance and the Development of Maintenance Manuals for Light Sport Aircraft
  • ASTM F2517 Specification for Determination of Child Resistance of Portable Fuel Containers for Consumer Use
  • ASTM F2601 Specification for Fire Safety for Candle Accessories
  • ASTM F2620 Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
  • ASTM F2666 Specification for Aboveground Portable Pools for Residential Use
  • ASTM F2746 Specification for Pilots Operating Handbook (POH) for Light Sport Airplane
  • ASTM F2874 Specification for One Time Use Portable Emergency Fuel Containers (PEFC) for Use by Consumers
  • ASTM F2933 Consumer Safety Specification for Crib Mattresses
  • ASTM F2947 Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
  • ASTM F2950 Safety and Performance Specification for Soccer Goals
  • ASTM F2959 Practice for Aerial Adventure Courses
  • ASTM F2974 Practice for Auditing Amusement Rides and Devices
  • ASTM F3114 Specification for Structures
  • ASTM F3218 Practice for Documenting Environmental Conditions for Utilization with A-UGV Test Methods
  • ASTM F3243 Practice for Implementing Communications Impairments on A-UGV Systems
  • ASTM F3244 Test Method for Navigation: Defined Area
  • ASTM F3263 Guide for Packaging Test Method Validation
  • ASTM F3265 Test Method for Grid-Video Obstacle Measurement
  • ASTM F3326 Specification for Flame Mitigation Devices on Portable Fuel Containers
  • ASTM F3363 Specification for Unvented Liquid/Gel Fuel-Burning Portable Devices
  • ASTM F3381 Practice for Describing Stationary Obstacles Utilized within A-UGV Test Methods
  • ASTM F3429 Specification for Performance of Flame Mitigation Devices Installed in Disposable and Pre-Filled Flammable Liquid Containers
  • ASTM F3463 Guide for Ensuring the Safety of Connected Consumer Products
  • ASTM F3499 Test Method for Confirming the Docking Performance of A-UGVs
  • ASTM G71 Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
discussion

Access to International Standards

In addition to the standards created by ASTM’s worldwide network of experts, we can provide you access to standards from other leading international standards development organizations.

Through ASTM Compass®, you get online access to the most up-to-date standards as well as powerful workflow tools to help your organization work smarter.

Instantly access any of ASTM’s 12,000+ standards, as well as AASHTO, AATCC, UNE (AENOR), API, AWWA, CGA, IES, and UOP standards whenever and wherever you need them with ASTM Compass.

In addition, you can access training, laboratory services and certification programs to help improve your competitiveness.

Learn More About ASTM Compass®